Freshman Rider
Currently Offline
Posts: 81
Likes: 0
Joined: Jul 14, 2013 18:18:36 GMT -5
|
Post by dykimusprime on Jul 14, 2013 18:49:10 GMT -5
Hello everyone, First & foremost I'm new here. Secondly, I'm a fairly new scooter owner. I bought a 2013 brand new TaoTao 49cc moped in Feb. Since I have owned it, I personally feel like someone is sabotaging my poor scooter, it is named Ninja. Anyway... In the last 3 weeks someone took my speedometer & flipped it upside down & put it back in & I was baffled trying to figure out why my speedometer suddenly stopped working. Well, I fixed it, so that problem went away. Last week, someone slashed my back tire, had to get that fixed. & Now, my scooter was making a very loud "tapping sound" I figured that since maybe I used a small amount of cheap gas, just enough to make it to my normal gas station to get the good stuff, that maybe I just needed to clean the carb really good. So, I start off by draining what was left of the cheap gas, replaced the fuel filter, poured the good gas in the tank along with some STP Complete Fuel System Cleaner. As well as changed the engine oil, gear oil, spark plug, & cleaned out the air filter. Cranked my scooter up & let it run for a few minutes & the noise was still the same. So, I take off the seat & start looking at my carb, I see that my air intake hose has a cut in it. A clean cut, like what a knife would cause. So, I keep looking & decide to take the valve cover off, due to assuming that was where the sound was coming from.. Well, As I was loosening the bolts I notice that the gasket seal is MELTED!!! Only in a small spot, under the valve cover. As well as the plastic "housing" around the seal. So, at the moment my scooter is out of commission & it REALLY sucks because I ride it every day to & from work. Sooooooo..... Yeah.... Sorry for the rant.... But, here is where I need your help.. I bought this scooter from a dealer in Texas, & just so happens that my warranty JUST expired. *sigh* So, I now need to buy these items... I need a new air intake hose, a gasket seal, & a seal that goes around the thing where the gear oil is. (Sorry, I don't know what all the parts are called.) What are good name brand replacements & where do I buy them online? With decent prices? Please help me!!!! Thank you, everyone for listening...
|
|
|
Post by teddy554 on Jul 14, 2013 18:59:59 GMT -5
|
|
|
Post by teddy554 on Jul 14, 2013 19:02:06 GMT -5
|
|
|
Post by tvnacman on Jul 14, 2013 19:14:21 GMT -5
welcome
John
|
|
Freshman Rider
Currently Offline
Posts: 81
Likes: 0
Joined: Jul 14, 2013 18:18:36 GMT -5
|
Post by dykimusprime on Jul 14, 2013 19:47:41 GMT -5
Ok, Stupid question... How do I know if I have a Short gasket or Long gasket? I also don't know how to post pix.. D8
|
|
|
Post by teddy554 on Jul 14, 2013 20:13:18 GMT -5
|
|
|
Post by teddy554 on Jul 14, 2013 20:15:04 GMT -5
|
|
Freshman Rider
Currently Offline
Posts: 81
Likes: 0
Joined: Jul 14, 2013 18:18:36 GMT -5
|
Post by dykimusprime on Jul 14, 2013 20:17:57 GMT -5
Cool... Now, what about for the Head gasket seal? Thats the one that was melted, I compared both of the pix & neither of them really look like the one that I took off... I wish I knew how to post pix so I could show you guys...
|
|
|
Post by JR on Jul 14, 2013 20:20:10 GMT -5
|
|
|
Post by teddy554 on Jul 14, 2013 20:34:53 GMT -5
I never use them anyways if i think what you are talking about is a connect piece of rubber/plastic that goes around the head to take up the small gap from the plastic shrouds the piece at 39 seconds is that what you are talking about
|
|
Freshman Rider
Currently Offline
Posts: 81
Likes: 0
Joined: Jul 14, 2013 18:18:36 GMT -5
|
Post by dykimusprime on Jul 14, 2013 20:39:26 GMT -5
Yes! lol That is the piece... I was thinking it was the head gasket seal.. Whatever that piece is, is melted & the plastic "housing" under it was also melted. I don't know... All I do know is that it is making a very loud tapping sound. Any other suggestions on what may be causing this?
|
|
|
Post by teddy554 on Jul 14, 2013 20:43:18 GMT -5
the only thing that probably that is tapping is your valves you can try to adjust them, and you can just cut off the melted stuff but if it is melted you most of ran the scooter to out
|
|
Freshman Rider
Currently Offline
Posts: 81
Likes: 0
Joined: Jul 14, 2013 18:18:36 GMT -5
|
Post by dykimusprime on Jul 14, 2013 20:46:14 GMT -5
Ran the scooter to out? I adjusted the valves not too long ago. & it really didn't start happening until I put the cheap gas in it..
|
|
|
Post by JR on Jul 14, 2013 20:50:58 GMT -5
Could even be a blown exhaust gasket making a noise similar to a tapping. Start it up and see if you feel hot gasses coming out from around the exhaust port on the head but be careful it can get you burned.
While the valve cover is off I'd check the valves anyway. Oh, check the valves with the motor cold.
|
|
Freshman Rider
Currently Offline
Posts: 55
Likes: 0
Joined: Jul 8, 2013 0:35:19 GMT -5
|
Post by djscootz on Jul 14, 2013 20:50:59 GMT -5
I think its great that you are willing to patiently fix everything and you've come to the right place for questions. Honestly, I would look into security for your scooter before replacing everything. It sounds like someone might be messing with you...although some of your problems are a lot of work for a prank. Maybe getting a lockable cover will help.
|
|