New Rider
Currently Offline
Posts: 30
Likes: 0
Joined: Apr 12, 2013 23:51:56 GMT -5
|
Post by scooternewby on Jun 21, 2013 1:21:30 GMT -5
Sounds like a compression issue if, IF!! You properly cleaned the carb.
|
|
Freshman Rider
Currently Offline
Posts: 86
Likes: 0
Joined: Mar 28, 2013 21:05:37 GMT -5
|
Post by andrewrides1 on Jun 22, 2013 16:17:17 GMT -5
you know what works for me when i cant start. take off the air filter hold hand over the snorkel kick a few times remove hand then kick it might start.
|
|
Sophomore Rider
Currently Offline
Posts: 117
Likes: 0
Joined: Mar 13, 2013 19:46:35 GMT -5
|
Post by pgs on Jun 24, 2013 8:57:03 GMT -5
sorry it took so long to get back i did a compression test it is right around 70 way to low guess i be rebuilding
|
|
New Rider
Currently Offline
Posts: 30
Likes: 0
Joined: Apr 12, 2013 23:51:56 GMT -5
|
Post by scooternewby on Jun 24, 2013 11:12:36 GMT -5
Yup, that's what I thought. Luckily its a straight forward repair. Not too expensive if you cant do it on you're own, really cheap if you can.
|
|
Sophomore Rider
Currently Offline
Posts: 117
Likes: 0
Joined: Mar 13, 2013 19:46:35 GMT -5
|
Post by pgs on Jun 26, 2013 15:11:32 GMT -5
around 130 for new kit
|
|
Freshman Rider
Currently Offline
Posts: 92
Likes: 0
Joined: May 31, 2013 22:01:37 GMT -5
|
Post by mileage on Jun 26, 2013 18:21:24 GMT -5
30 for someones old cylinder they pulled off a brand new bike and slapped a bbore on there. edit: cylinder, piston and rings. and a new pin and wrist pin, get their wrist pin too if they got one. they'll wear out.
|
|
