Currently Offline
Posts: 0
Likes:
Joined: Nov 22, 2024 6:40:21 GMT -5
|
Post by Deleted on May 24, 2013 21:14:30 GMT -5
Ordered one to replace my stock carb. WIll there be any noticeable difference in the way it runs?
|
|
|
Post by larry001964 on May 24, 2013 21:17:41 GMT -5
yes if your replacing the original you will see an air/fuel adjustment screw, that will allow even better tuning.
|
|
|
Post by skuttadawg on May 24, 2013 22:32:08 GMT -5
Should also have a needle clip in order to change its position . Most have a 18mm so a size up should help improve the flow but too big can be a bummer as it would not make it go faster . With a larger venturi you have more air and may need a larger main jet to compensate the additional air . As far as what size jet to use there is no one specific answer as things like climate and altitude all play a contributing factor as to how it will perform . I would get a jet kit like this for example enviromoto.ecrater.com/p/4129835/naraku-main-jet-set-gy6-50 that way you can test a few out and have others for future mods like airfilter and exhaust upgrades .
|
|