Sophomore Rider
Currently Offline
Posts: 137
Likes: 1
Joined: Mar 4, 2013 17:29:00 GMT -5
|
Post by ilovenxstage on May 23, 2013 8:11:23 GMT -5
Does anyone know the best way to free a stuck clutch bolt? Not even my impact wrench will break it free. It feels like it might as well be welded to the clutch bell!
|
|
|
|
Post by dragonsparks on May 23, 2013 8:28:53 GMT -5
Is it the first time to be taken apart? If yes, some manufactures put thread lock on at Assembly. You can use a heat gun to liquefy thread lock. In a pinch you could try a blow dryer ,but it's going to take a long time to heat it up. Hope that helps.  Dave |
|
Freshman Rider
Currently Offline
Posts: 56
Likes: 2
Joined: May 14, 2013 22:50:01 GMT -5
|
Post by chihuahuas on May 23, 2013 10:07:25 GMT -5
try using an impact socket.
|
|
|
|
Post by dragonsparks on May 23, 2013 10:56:33 GMT -5
DX Chihuahuas  You must be from over the pond. Here a impact wrench purt ner tha same Thing. I per fur impact gun sounds more mini sing.  Dave |
|
Freshman Rider
Currently Offline
Posts: 56
Likes: 2
Joined: May 14, 2013 22:50:01 GMT -5
|
Post by chihuahuas on May 23, 2013 11:26:29 GMT -5
Put a Spanner on it.
|
|
Sophomore Rider
Currently Offline
Posts: 137
Likes: 1
Joined: Mar 4, 2013 17:29:00 GMT -5
|
Post by ilovenxstage on May 23, 2013 11:44:21 GMT -5
try using an impact socket. I tried that and it didn't work, however my compressor is not very big and doesn't provide a lot of power for an impact wrench. I can't afford a bigger compressor, or an electric impact wrench right now. |
|
