New Rider
Currently Offline
Posts: 17
Likes: 0
Joined: Apr 20, 2013 23:04:56 GMT -5
|
Post by jblann81 on May 17, 2013 23:03:02 GMT -5
I changed my fuel line and now my scooter is really really slow... it used to run 35-40 mph now it barely runs 20 mph... it keeps bogging down and sputters and shuts completely off sometimes.... i just had a valve adjustment and carb cleaned but idk where to turn....
|
|
Currently Offline
Posts: 0
Likes:
Joined: Nov 21, 2024 23:14:04 GMT -5
|
Post by Deleted on May 17, 2013 23:10:19 GMT -5
Seems pretty obvious. How many lines? did you connect them to the valve in the correct order? Did you change the filter?
If they are in the correct location take them off and blow through them. Bugs like tight places in the parts stores.
|
|
|
|
Post by alleyoop on May 17, 2013 23:17:25 GMT -5
Who did the carb clean and valve adjustment I would question whoever did that.
Alleyoop
|
|
New Rider
Currently Offline
Posts: 17
Likes: 0
Joined: Apr 20, 2013 23:04:56 GMT -5
|
Post by jblann81 on May 17, 2013 23:18:26 GMT -5
[replyingto=redroush00]redroush00[/replyingto]yeah its a clear yellow tubing...idk if it is because of it is a flimsy material... idk what else to do... its really frustrating!
|
|
|
|
Post by onewheeldrive on May 17, 2013 23:21:04 GMT -5
What were the valve gaps set to? What size engine do you have?
|
|
|
|
Post by alleyoop on May 17, 2013 23:23:33 GMT -5
Is the fuel filter installed the right way. Take a picture of your carb area and hoses.
Help us help you IDK does nothing to find out what the problem is. It could be as simple as the throttle cable was put on wrong and not adjusted.
Alleyoop
|
|
New Rider
Currently Offline
Posts: 17
Likes: 0
Joined: Apr 20, 2013 23:04:56 GMT -5
|
Post by jblann81 on May 17, 2013 23:34:49 GMT -5
ok i will upload a photo in the am... the only thing replaced was the fuel line.... i noticed fuel isnt filling up the filter like when the other fuel line was on it... i had to change the fuel line because it wasnt the right size for a 2009 jonway chinese scooter... what size is the hose supposed to be?
|
|
New Rider
Currently Offline
Posts: 17
Likes: 0
Joined: Apr 20, 2013 23:04:56 GMT -5
|
Post by jblann81 on May 22, 2013 12:27:53 GMT -5
it wont let me post a pic.... I send you pics via txt 8282055767.... im about to just take it to the scrap yard im so fed up with it
|
|
New Rider
Currently Offline
Posts: 25
Likes: 0
Joined: May 2, 2013 14:04:29 GMT -5
|
Post by billythegrape on May 22, 2013 12:57:05 GMT -5
Dude I am no scooter expert, but I am a car mechanic- did it act this way after valve and carb adj? Or just after fuel line rplcmnt?
|
|
|
|
Post by alleyoop on May 22, 2013 13:13:22 GMT -5
Whoever touched it I am sure adjusted the valves and or carb wrong. Changing a fuel line is not going to cause the scoot to run bad like he says it does. Fuel lines are usually 1/4 ID EXCEPT from the Fuel Filter to the CARB because the fuel inlet on the CARB takes a 3/16 hose. So From the TANK to the Petcock 1/4 id fuel hose, From the Petcock to the Fuel Filter 1/4 id fuel hose then from the Fuel Filter to the Carb 3/16 fuel hose.
Alleyoop
Alleyoop
|
|
New Rider
Currently Offline
Posts: 17
Likes: 0
Joined: Apr 20, 2013 23:04:56 GMT -5
|
Post by jblann81 on May 22, 2013 14:12:10 GMT -5
it ran great for about a week and then gas just stated pouring from the fuel line, the line that runs from the gas tank
... it was a fuel line I bought from lowes hardware 1/2od 1/4 id.... the new fuel line is 3/16 5/16... it starts and runs but it jerks and sounds like its sputtering... now it goes 8 mph uphill and 16-17 mph straightaways.... the lights all flicker too
|
|
New Rider
Currently Offline
Posts: 17
Likes: 0
Joined: Apr 20, 2013 23:04:56 GMT -5
|
Post by jblann81 on May 22, 2013 14:12:43 GMT -5
ive got pics but idk why it wont post em
|
|
New Rider
Currently Offline
Posts: 17
Likes: 0
Joined: Apr 20, 2013 23:04:56 GMT -5
|
Post by jblann81 on May 22, 2013 19:25:31 GMT -5
how hard is it to adjust the valves? now I am skeptical of the nearest bike shop...
|
|
New Rider
Currently Offline
Posts: 25
Likes: 0
Joined: May 2, 2013 14:04:29 GMT -5
|
Post by billythegrape on May 22, 2013 20:45:11 GMT -5
Double check all lines. Like I said, not a scooter guy but I just finished googling "gy6 carb" and it shows a dozen images of lines and their respective connecting nipples. The lights are probably just flickering because the engine is dropping out from fuel starvation. Somebody did something wrong. Did you ride it between any of the repairs? This would tell you which of them is done wrong.
|
|
|
|
Post by alleyoop on May 22, 2013 21:20:55 GMT -5
Use push picture to put up pictures here it is easy and free: picturepush.com/host.php?image=100759501. Click on the BLUE UPLOAD another image 2. Click on BROWSE 3. That will display your computer directories 4. click on where your picture is at 5. Click on your picture and click on OPEN and it will load it 6. Then scroll down to the box where it says640*480 7. Click on the 2nd entry in those links -- it will turn blue 8. Right click and click copy 9. Come here and right click and paste it in your post. Alleyoop |
|
..BAD TO THE BONE..
