New Rider
Currently Offline
Posts: 7
Likes: 0
Joined: May 5, 2013 11:57:13 GMT -5
|
Post by suzeeg on May 11, 2013 20:00:09 GMT -5
Hi Ya'll, I have a pst150-11 and noticed a little fraying of the throttle cable . Was wondering if this was a big deal and need to change it right away or if it will last a while? If it does need changing, what is the correct length to order? And also, I wanted to change the rusty, crusty, lug nuts on the wheels and the fairing trim bolts but do not exactly know where to go for that? Any help would be appreciated. Thanks in advance.
|
|
|
Post by onewheeldrive on May 12, 2013 0:06:58 GMT -5
Fraying is a big deal. Sooner or later the "fraying" may get stuck and keep your throttle open---regardless where your hand is on the throttle.
|
|
|
Post by carasdad on May 12, 2013 5:14:33 GMT -5
DX Matt at partsforscooters.com can fix ya up.. I sell parts but I only do it locally for my customers..I don't infringe on others turf. get it fixed!!! one of 2 things will happen...it will break and you push it home...or as onewheeldrive said..it will stick wide open. I have had both happen...neither is fun. D8
|
|
|
Post by alleyoop on May 12, 2013 13:27:17 GMT -5
You will have to take the Throttle cable off and measure it to get the right length and type.
The lug nuts take one with you and go to any auto parts store or NAPA is better they have loose pieces a regular auto parts store have all the things in packages. As for the TRIM screw are you taling about the Philps head screws that hold the fenders THOSE you may find at a Hardware store. Although I tried and they do have them but the heads are a little smaller than the ones that come with the TRIKE. I then ordered them from ICE BEAR. Alleyoop
|
|