|
|
Post by alleyoop on May 17, 2013 16:59:35 GMT -5
|
|
New Rider
Currently Offline
Posts: 20
Likes: 0
Joined: May 7, 2013 7:20:54 GMT -5
|
Post by bolsadepiojo on May 27, 2013 8:27:58 GMT -5
Hey guys! Just bought a new carb and did another valve adjusent (it was a little to high) she's running like a dream now!! ...however... Last step was replacing the speedo cable, which I did. Greased it up and everything, bit it's still not working. Is there any way to replace the piece that's in the tire? I feel like that may be the issue. I greased it as well An it does spin, bit for whayever reason I can't get it to work. Well, it worked for
About 3 seconds and that was that. Ideas? Everything else is working great though , finally!!
|
|
|
|
Post by tvnacman on May 27, 2013 9:07:13 GMT -5
pull the cable from behind the speedo spin the front wheel and see if the cable spins . It could be the speedo .
John
|
|
New Rider
Currently Offline
Posts: 20
Likes: 0
Joined: May 7, 2013 7:20:54 GMT -5
|
Post by bolsadepiojo on May 28, 2013 7:58:43 GMT -5
The cable was broken, I replaced it. When I spun the tire at 1st the tab inside the tire wasn't spinning. Then I greased it and got it spinning when I spin the tire....but for some reason It only worked for about 3 seconds and now wont work again. I greased the cable good and everything. Could it be because the new cable it a little longer than the original? I couldn't find one that was going to be an exact fit.  |
|
New Rider
Currently Offline
Posts: 20
Likes: 0
Joined: May 7, 2013 7:20:54 GMT -5
|
Post by bolsadepiojo on May 28, 2013 11:53:29 GMT -5
|
|
..BAD TO THE BONE..
