Sophomore Rider
Currently Offline
Posts: 201
Likes: 0
Joined: Mar 13, 2013 8:01:35 GMT -5
|
Post by burnrubber on Apr 17, 2013 0:41:15 GMT -5
Help! Where can I find a speedo cable that is 39 an 1/2 inches long? That's the measurement of the inside cable its self, not the cable housing. Can't measure the housing because It's still on the scoot. Looks like a pain to replace. It has 12 inch wheels. I've looked all over for one,no luck at all.  P.S. It's a handsome boy body style. Thanks! |
|
|
|
Post by skuttadawg on Apr 17, 2013 7:21:53 GMT -5
|
|
Sophomore Rider
Currently Offline
Posts: 201
Likes: 0
Joined: Mar 13, 2013 8:01:35 GMT -5
|
Post by burnrubber on Apr 17, 2013 11:52:35 GMT -5
Anyone ever replaced a speedo cable on a Handsome Boy Body Style before,I've never had to replace one before |
|
Sophomore Rider
Currently Offline
Posts: 174
Likes: 1
Joined: Mar 17, 2013 11:51:20 GMT -5
|
Post by indymoped on Apr 17, 2013 21:17:19 GMT -5
On the speedometer gauge side it is going to be threaded onto a stud. you simply screw it off and on. you may need pliers/vise grips to break it loose. On the input side down at the wheel it may be threaded as it is at the top. In which case you will do the same thing. Or if its not threaded there will be a screw. Most likely a phillips type that you unscrew to remove it and once the new one is in tighten it back up.
|
|
Sophomore Rider
Currently Offline
Posts: 201
Likes: 0
Joined: Mar 13, 2013 8:01:35 GMT -5
|
Post by burnrubber on Apr 18, 2013 9:51:02 GMT -5
I know all of that( indymoped) I just want to know how much of front end to take apart? The cable housing is tied to the frame of the SCOOTER. I've got to take off body panels in order to remove the speedo cable, What body panels need to be removed on the front an how much do I have to remove???
|
|
