New Rider
Currently Offline
Posts: 14
Likes: 0
Joined: Apr 3, 2013 14:34:46 GMT -5
|
Valve help
by: newguy757 - Apr 6, 2013 22:24:31 GMT -5
Post by newguy757 on Apr 6, 2013 22:24:31 GMT -5
My brother and I took my 49cc VIP to a shop and they said valves were really tight not moving much the scooter has 1356km/h on the tack they shop owner was going crazy on how I've gotten so far with no real tune. To the engine! Now that the valves have been done not to sure what all they did but huge power increase 54mph GPS verified but the engine sounds like I'm sitting on a sewing machine making blankets while I'm going down the road the guy that did the valve adjustments works for BMW in there motorcycle shop he says its perfect I'm feeling a little weird bout this any Rlp woul be great
|
|
|
|
Valve help
by: alleyoop - Apr 6, 2013 22:31:34 GMT -5
Post by alleyoop on Apr 6, 2013 22:31:34 GMT -5
If they CLATTER CLATTER CLATTER they are a little to loose, TICKY TICKY TICKY is good. A little loose valve is a happy valve  Alleyoop |
|
New Rider
Currently Offline
Posts: 14
Likes: 0
Joined: Apr 3, 2013 14:34:46 GMT -5
|
Valve help
by: newguy757 - Apr 6, 2013 22:35:21 GMT -5
Post by newguy757 on Apr 6, 2013 22:35:21 GMT -5
It's loud not like a car valve that hummm a bit but loud
|
|
|
|
Valve help
by: onewheeldrive - Apr 7, 2013 18:02:14 GMT -5
Post by onewheeldrive on Apr 7, 2013 18:02:14 GMT -5
It's loud not like a car valve that hummm a bit but loud If you're unsure, go down to an auto parts store and get a set of feeler gauges and check the valves. |
|
|
|
Valve help
by: teddy554 - Apr 7, 2013 20:31:54 GMT -5
Post by teddy554 on Apr 7, 2013 20:31:54 GMT -5
if your getting 54mph i would deal with the noise lol but most of them tick like that when gap right
|
|
Sophomore Rider
Currently Offline
Posts: 239
Likes: 1
Joined: Mar 13, 2013 9:13:17 GMT -5
|
Valve help
by: jeffery5568 - Apr 7, 2013 21:42:17 GMT -5
Post by jeffery5568 on Apr 7, 2013 21:42:17 GMT -5
It you are running that fast don't touch it. Some spend $100 to get there 50cc to run that fast.
|
|
|
|
Valve help
by: teddy554 - Apr 7, 2013 21:53:05 GMT -5
Post by teddy554 on Apr 7, 2013 21:53:05 GMT -5
That was after the valve job
|
|
New Rider
Currently Offline
Posts: 14
Likes: 0
Joined: Apr 3, 2013 14:34:46 GMT -5
|
Valve help
by: newguy757 - Apr 7, 2013 23:19:35 GMT -5
Post by newguy757 on Apr 7, 2013 23:19:35 GMT -5
yeah all stock but the cdi and coil (most say they dont help) but im 54mph at 7.5k rpm so not sure but it was like that yesterday but now only doing 36mph guess a/f needs a little spin to get me back to 54mph
|
|
New Rider
Currently Offline
Posts: 14
Likes: 0
Joined: Apr 3, 2013 14:34:46 GMT -5
|
Valve help
by: newguy757 - Apr 7, 2013 23:22:40 GMT -5
Post by newguy757 on Apr 7, 2013 23:22:40 GMT -5
but throttle is supper lose and only hitting 6k rpms something isnt right so i will tune the a/f screw tonight just got off work and going for a ride tonight since its still 61 out but these carb need to be tuned when it gets below 60 in va beach
|
|
New Rider
Currently Offline
Posts: 1
Likes: 0
Joined: Apr 8, 2013 17:06:25 GMT -5
|
Valve help
by: jimbob - Apr 8, 2013 17:32:33 GMT -5
Post by jimbob on Apr 8, 2013 17:32:33 GMT -5
I once saw a video on here of a guy showing how to adjust valves on a 50cc TaoTao. Anyone know how I can find a video that shows all the steps?
|
|
|
|
Valve help
by: alleyoop - Apr 8, 2013 17:41:42 GMT -5
Post by alleyoop on Apr 8, 2013 17:41:42 GMT -5
Is this it:
Alleyoop
|
|
..BAD TO THE BONE..
