New Rider
Currently Offline
Posts: 1
Likes: 0
Joined: Oct 1, 2018 20:12:51 GMT -5
|
Post by quilla333 on Oct 1, 2018 23:26:33 GMT -5
I have a 2004 Vento Phantom that i had to put a new wiring harness and bought a complete kit that had the key switch, stator,magneto,lights,start,turn signal, horn switches,voltage regulator etc. at first it was blowing fuses and found out it was a bad configured wire in the harness that i fixed and the problem was solved. now a bought an alarm system for the scoot that is plug and play. it does arm and disarmed the alarm but it will not remote start, i can hear the alarm click but it wont remote start. i took my vom meter and traced the red/yellow wire to the solenoid and when I push the remote start I get the correct 12.15v from the blue wire that is connected to the red/yellow wire. but if I set the vom to chirp when I trace the wire to the solenoid i get chirping in both red/yellow and green/yellow. only red/yellow are in the alarm harness plug. maybe i am missing something.also the instructions are in Chinese and I have seen many diagrams but still can't figure out whats wrong can someone please help me solve this problem so I can remote start the scooter? Thanks
|
|