New Rider
Currently Offline
Posts: 20
Likes: 1
Joined: May 20, 2018 13:28:08 GMT -5
|
Post by danstone on Jun 14, 2018 20:15:21 GMT -5
It did it again almost seems like it might be the petcock, perhaps when I work it to hard maybe there is not enough vacuum shuts off burns whats in the fuel bowl and sputter sputter out. If I catch it early I can keep it going.
|
|
New Rider
Currently Offline
Posts: 20
Likes: 1
Joined: May 20, 2018 13:28:08 GMT -5
|
Post by danstone on Jun 13, 2018 14:29:10 GMT -5
OK this may sound weird but, I actually made the gap smaller on the intake .003" and left the exhaust .004" checked loosened and reset. the bike starts when hot. While I was at it I figured I have the socket on my drill looked at the belt looks like new,but the clutch pulley has a big old ding in it on the outside edge going in maybe deforming it for a 1/2" to 3/4" (maybe someone was trying to pry something?) will that affect my hills or just low speed take off.
Contra and clutch springs are on order maybe arriving tomorrow?
Jets arrived is there a consensus on jet to go with a BBK? I'll also search the forum but it looks like at really varies.
You guys have been very helpful.
Thank You
|
|
New Rider
Currently Offline
Posts: 20
Likes: 1
Joined: May 20, 2018 13:28:08 GMT -5
|
Post by danstone on Jun 10, 2018 12:52:24 GMT -5
Thanks for the input I'll be working on the scoot tomorrow, my Jets should be here.
I will double check the valves. I did the Valve adjustment the other day .004 for both intake and exhaust. It's tapping a bit so I'm going to go down to .003 to hopefully quiet that a bit. I have not had to use a feeler gauge for a while either so I might be off even though I measured after tightening, it's running so much better than when I got it. Because it wasn't.
I forgot to say the starter seems to spin a slow compared to my Kymco cobra the battery reads 12.3V ish but if I jump it, it does spin a bit faster but still doesn't want to start.
So once I get the hard starting fixed should I start with installing lighter rollers next?
|
|
New Rider
Currently Offline
Posts: 20
Likes: 1
Joined: May 20, 2018 13:28:08 GMT -5
|
Post by danstone on Jun 9, 2018 23:38:46 GMT -5
Hello, I've never posted but have been around here a bit. So I have a new to me scooter. It's a Peace Transit 50. I know there is a BBK on it, unknown manufacturer. I'm assuming the main jet was never changed. (It runs ok until it gets hot and if I need to restart it just won't fire up, the electric choke thing appears to be working correctly other posts suggest a larger main jet, so that's on order) When I hit a hill going 40 it slows way down to 20-25 and that's it.
Here is the kicker I weigh 330lbs. What can I realistically make this poor beast of burden do? I'd hate to have to carry the thing to the top of each hill.
I'm sure changing the weights is something I should try or should I change out the Variator and the weights?
Thanks for the input.
I've lost 65lbs I have more to lose so that will be a free upgrade i'm sure.
|
|
