New Rider
Currently Offline
Posts: 7 
Likes: 0
Joined: Nov 3, 2016 22:09:49 GMT -5
|
Post by jeff250 on Nov 8, 2016 19:45:03 GMT -5
Ok, thanks a lot, I,m going to order one of those 3 dollar crankcase vents online . I will let that long hose suck air believing it is a pair system ,injectinig fresh air into the exhaust, unless someone tells me otherwise. Down the road I,ll look into maybe removing all of it.  |
|
New Rider
Currently Offline
Posts: 7
Likes: 0
Joined: Nov 3, 2016 22:09:49 GMT -5
|
Post by jeff250 on Nov 8, 2016 19:22:26 GMT -5
If I got a blanking plate for the head eliminating all that stuff wouldn't I need a different valve cover that had a place to connect a breather hose?
|
|
New Rider
Currently Offline
Posts: 7
Likes: 0
Joined: Nov 3, 2016 22:09:49 GMT -5
|
Post by jeff250 on Nov 8, 2016 15:44:36 GMT -5
No it's not venting to air now in the picture ,I hooked it to that black thing that has a filter in it . Looked like it went there ,then the other side of the piece your calling a black canister is , goes back to that metal box with vacuum hose to carburator and and hose to head. It wasntt connected before but looked like it went there. I didn't know if it was connected before. Without breather connected to that black piece with filter in it you call a canister, air seems to pulsate at it when I put a piece of plastic next to the hole, and at full throttle suck air. My brother bought it in or here 2007 and dont remember. One person told me to just clamp that hose off to the metal box, since there isn't a separate valve cover breather hose ,and to have the crankcase to just go to air. I don't know it that is right though. The way he said if in that case that is how the valve cover breaths to just clamp it off.
|
|
New Rider
Currently Offline
Posts: 7
Likes: 0
Joined: Nov 3, 2016 22:09:49 GMT -5
|
Post by jeff250 on Nov 8, 2016 0:47:17 GMT -5
Guess no one has the answer on this. It's a bx150-db. Bamxusa don't answer there phone, says on there website leave message, they don't call backk or answer there email. No manual on this bike.  |
|
New Rider
Currently Offline
Posts: 7
Likes: 0
Joined: Nov 3, 2016 22:09:49 GMT -5
|
Post by jeff250 on Nov 4, 2016 17:02:24 GMT -5
|
|
New Rider
Currently Offline
Posts: 7
Likes: 0
Joined: Nov 3, 2016 22:09:49 GMT -5
|
Post by jeff250 on Nov 4, 2016 0:27:31 GMT -5
|
|
New Rider
Currently Offline
Posts: 7
Likes: 0
Joined: Nov 3, 2016 22:09:49 GMT -5
|
Post by jeff250 on Nov 4, 2016 0:25:21 GMT -5
First I'm new, and one of your senior members "alleyoop" thread 4902 identified different emission systems, but he hasn't been on since 2015, another thing your main page shows s off-road and ATV but all in here seems to be scooters only.
Anyhow I have this dirt bike bamx voyager 150 2007 I believe and the crankcase breather ,hose fell off. There was this other hose with a plastic thing foam filter in it , it used to just dangle, but looked like it went to the crankcase breather hose but now the bike runs to rich. In the picture I have it hooked to the crankcase breather with the zip tie picture, but I'm wondering if it should not be hooked to the breather. There is no air box, just filter on carb or no other canisters just the parts in the picture. The little vacuum hose before carb and the one in the picture to the head, and the other large hose with the filter in that black plastic piece, witch is in question, is it suppose just let air in ,or does it suppose to be hooked to the crankcase breather hose like I have it?
|
|
