Closed my powersports shop!!! I have 5 NEW scooters forsale. These are 2008 model year scooters that have been setting here in storage since I closed. 2 are lance 250 cc liquid cooled duke 250 ( still in the original shipping crates) the other 3 are CF MOTO 150 cc liquid cooled scooters with 16 inch tires. these were sold by Q link under the name PEGASUS. The 3 150s have been put together and we're floor display models. ALL 5 have never been titled. Anyone buying these will have to arrange there own shipping I will do my best to help load them I'm located in OHIO. SORRY BUT I WILL ONLY SELL AS A PACKAGE ( ALL 5 ONE MONEY ) 4000.00 thousand dollars for ALL 5. unless you are a dealer I am also required by law to collect sales tax. Again don't ask me to separate YOU BUY ALL 5 OR NOTHING!!!! sorry but just want to move on with my other business. Contact me here and I can forward a phone# to make arrangements for payment and pickup. This is one of a deal on these scooters if you know the quality of CF MOTO. Thanks Kevin. Still available.
You said you resurfaced the head I'm betting the factory acorn nuts are bottoming out on the studs before your gasket is torque down. you might try putting one washer on each of the four studs then put your acorn nuts on and retorqueing your head. I had two brand new 250 scooters that had overheating problems right out of the crates in my shop and it took me forever to figure out the problem. the four studs were to long and the acorn nuts we're bottoming out before the gasket was smashed down sounds like the same problem your having. good luck hope this helps.
My wife and myself have the cfmoto v3 and v5 motorcycle they both run the 1000-24.2-30 belt can anyone tell me is there another belt we can run that will get us a little more top end? I was thinking a shorter belt would give us more top end but not sure. Thanks for your help.