New Rider
Currently Offline
Posts: 4 
Likes: 0
Joined: Apr 29, 2016 1:31:42 GMT -5
|
Post by worm0527 on Apr 30, 2016 21:08:08 GMT -5
Im trying not to throw parts at it. It been since last november that this has happened and over that period of time those are the parts I have put on in there. And I dont have a melmeter to check the voltage. And with the valves do I have to put the engine a certian way? I wanted to rebuild this scooter anyways. I bought it used with 9,000 miles on it.
|
|
New Rider
Currently Offline
Posts: 4
Likes: 0
Joined: Apr 29, 2016 1:31:42 GMT -5
|
Post by worm0527 on Apr 29, 2016 15:09:37 GMT -5
Im trying not to throw parts at it. It been since last november that this has happened and over that period of time those are the parts I have put on in there. And I dont have a melmeter to check the voltage. And with the valves do I have to put the engine a certian way? I wanted to rebuild this scooter anyways. I bought it used with 9,000 miles on it.
|
|
New Rider
Currently Offline
Posts: 4
Likes: 0
Joined: Apr 29, 2016 1:31:42 GMT -5
|
Post by worm0527 on Apr 29, 2016 2:24:01 GMT -5
I have checked the spark plug hole and it did do that and alsoi can smell gas. As far as valves I am a little nerves about doing that only because I have never messed with that before. Amd also my headlight was not coming on when running my high beam worked but my low beams ( which isually turn on when I turn key) didnt. And also the new carb has not been put on just yet. But if the new carb doesnt work I should lok at the valves?
|
|
New Rider
Currently Offline
Posts: 4
Likes: 0
Joined: Apr 29, 2016 1:31:42 GMT -5
|
Post by worm0527 on Apr 29, 2016 1:46:22 GMT -5
I have a 150cc Peace Sport retro style scooter. My scooter stopped cranking but when I would jump it off and it would fire right up having to give it gas it would stay running (if it sgut off I would have to jump it again). I rode it still, then it just completely stopped running jumping it off wouldnt even work. I have replaced the stator, starter motor, starter solenoid relay, cdi, spark plug,ignition coil, and new battery.(and I also replaced my variator because I needed a new one). After all that it finally started up but did not stay running. It does and would not start back up. So I decided to order a new carb also (wasnt sure if old gas messed up the carb). Please help! Needing some advice......
|
|
