New Rider
Currently Offline
Posts: 6 
Likes: 0
Joined: Dec 4, 2015 19:04:52 GMT -5
|
Post by eppicindustries on Dec 9, 2015 12:13:30 GMT -5
ok this is looking like we are on the right track now. I have one concern. There's no part numbers on any of this stuff. Can you fine chaps direct me to the correct part?
In canada this scooter is labeled as a 150cc. they don't technically sell anything bigger. some weird law that if it's a certain cc's you can't have your legs in front of you. we have weird rules. but... so far I get away with a lot of emission crap. However that might change now. our new Prime Minister is a tree huger, so i can see california type regulations coming into play pretty soon. Bye-bye supercharger on my miata.
|
|
New Rider
Currently Offline
Posts: 6
Likes: 0
Joined: Dec 4, 2015 19:04:52 GMT -5
|
Post by eppicindustries on Dec 9, 2015 12:05:26 GMT -5
yy250t on one of the tags. Hmmmm. so the parts guys told me I got the wrong thing and my customer thinks he's on a 150. It is liquid cooled. maybe we are getting somewhere now.  |
|
New Rider
Currently Offline
Posts: 6
Likes: 0
Joined: Dec 4, 2015 19:04:52 GMT -5
|
Post by eppicindustries on Dec 8, 2015 14:00:34 GMT -5
|
|
New Rider
Currently Offline
Posts: 6
Likes: 0
Joined: Dec 4, 2015 19:04:52 GMT -5
|
Post by eppicindustries on Dec 7, 2015 21:42:28 GMT -5
BZ169MM is close to the rear wheel. Otherwise this sucker is a blank canvas.
or do i need to pull the cover on that side and look inside? stamped on the case in there maybe?
|
|
New Rider
Currently Offline
Posts: 6
Likes: 0
Joined: Dec 4, 2015 19:04:52 GMT -5
|
Post by eppicindustries on Dec 7, 2015 11:37:31 GMT -5
the only number i'm finding anywhere on that engine is 1200cm3
any general place they are usually hidden?
nothing useful on the vin tag that i can see.
but what do i know...
thanks for the help so far guys. really appreciate it.
|
|
New Rider
Currently Offline
Posts: 6
Likes: 0
Joined: Dec 4, 2015 19:04:52 GMT -5
|
Post by eppicindustries on Dec 4, 2015 20:46:05 GMT -5
Hey guys I have a customer here with a saga 150cc scooter. Has a gy6 in it. starter clutch blew. I can't seem to find anything that resembles a replacement for what I pulled out. closest thing I have found so far is from a yamaha raptor 660 but haven't been able the verify measurements to see if it's the same. Can anyone point me in the right direction of where I might find a starter clutch with a bushing in the center and not a keyway?  the starter clutch bolts to the magneto and the gear is sanwiched between the starter clutch and the case    |
|
