New Rider
Currently Offline
Posts: 2
Likes: 0
Joined: Oct 29, 2015 17:42:29 GMT -5
|
Post by oharris91 on Oct 29, 2015 18:13:05 GMT -5
The variator is stock yes, just swapped out the rollers with the 9g ones that came with the big bore kit.
It is a light scooter, plus I only weigh like 135lbs so I would like to see 40/45 outta it if possible.
Any recommendations on vatiators that don't break the bank but will allow me to get up in speed more?
Cheers!
|
|
New Rider
Currently Offline
Posts: 2
Likes: 0
Joined: Oct 29, 2015 17:42:29 GMT -5
|
Post by oharris91 on Oct 29, 2015 17:44:30 GMT -5
Hey guys! I am new to the forums (NW Burbs of Chicago) but have had my scoot for a while now. Its a Roketa Maui 50 with around 2k miles on it. I recently decided to start modifying it as the 35/6 mph top speed and lack luster acceleration was just getting a little slow for local traffic. Modifications: "100cc" Big Bore Kit with cylinder head (like most its actually a 47mm bore) Stock idle jet, # main jet Blue racing CDI Orange Ignition Coil NGK Platinum spark plug Uni filter Shortened stock muffler (gutted/straight thru) 9g roller weights After installing all these modifications, it is definitely a lot more torquey. BUT my top speed is not only 29/30mph! What gives?! I have tried a plethora of different main jets ranging from stock #78 all the way to a # (too rich and bogged hard) and the # seems to run the best by far, and look the best from a plug chop at WOT, but its just not fast enough! I only weigh 135lbs so I would expect to see 40+ out of the big bore scoot. Any ideas at all guys? Cheers! Oliver
|
|