New Rider
Currently Offline
Posts: 3 
Likes: 1
Joined: Sept 17, 2015 14:58:22 GMT -5
|
Post by ohmykai on Sept 26, 2015 15:45:24 GMT -5
So everything works as normal, when I charge the battery. My ignition switch became corroded and a fair deal of it broke away. I used a pair of pliers to switch the inside of the ignition cap over to effectively be "always on," thus tapping the battery in the process which will probably need to be replaced once the ignition is fixed.
Everything works as it should, aside from the janked ignition switch!
|
|
New Rider
Currently Offline
Posts: 3
Likes: 1
Joined: Sept 17, 2015 14:58:22 GMT -5
|
Post by ohmykai on Sept 22, 2015 13:38:01 GMT -5
Apologize for the delay in response. Forgot my login credentials. Included below are relevant pictures. Some of the housing of the ignition itself, and the cosmetic end of the ignition are not present/broke! Let me know if there is anything else that may help determining the part I'd need! I suppose it's fair to include that I'm fairly capable mechanically, and electrically. If a little rewiring of a plug is in order - not an issue. Details to start: Yes, it runs! Kick starts with little hesitation! It actually runs quite well aside from the no electric start... all other problems come from the ignition not being connected / tapping the battery. -Kai Scooter:  Mounting side:  Male plug end:  Free wire end:  |
|
New Rider
Currently Offline
Posts: 3
Likes: 1
Joined: Sept 17, 2015 14:58:22 GMT -5
|
Post by ohmykai on Sept 17, 2015 15:01:37 GMT -5
Hey guys. Very new. Got a quick question.
Neighbor gave me 50cc Roketa Scooter. MC-16-50 model.
I know nothing about these things and the ignition switch is shot. Ordered a part - didn't fit even remotely. (Can provide pictures if needed)
What I do know:
50mm mounting distance on the ignition
4 wire - technically 3 pins and a separate ground maybe?
Can't find the matching part anywhere.
Thoughts?
|
|
