Recent Posts  By   (Read times)

I hope you don't mind if I ask the same type question about my scoot's wiring.  I took the nosecone off my gy6150 because I had received the machine with an already burnt out headlamp.  As many of you prob know, the whole front practically has to come off to replace lightbulbs.  well, I replaced the burnt out bulb, plus put better headlamps in.  Before I put everything back together, I connected the 6-prong connector, and turned on the machine to see if the lamps all work.  They didn't.  The front turn signals do not work at all.  One time, only the high-beams worked.  I jiggled the wires a little.  The regular beams worked, but the high beam didn't.  I jiggle some more...now the headlamps don't work.  Also, the horn doesn't work.  The starter button on the right side works fine.

Should I just pull out the old wires and re-wire the 6prong with solid copper wire and put on new connectors?  Should I replace the hi/low switch?

I really want my scoot to run again.  I've spent most of the year with it in pieces fixing and tinkering with it.  Kinda tired of working on it during the weekends, just want to ride...

thanks for letting me hop on to your post.