New Rider
Currently Offline
Posts: 6 
Likes: 0
Joined: Jul 25, 2014 13:45:08 GMT -5
|
thank-you
by: lawauna52 - Jul 26, 2014 21:41:10 GMT -5
via mobile
Post by lawauna52 on Jul 26, 2014 21:41:10 GMT -5
Oldchopperguy in texas thank-you
|
|
New Rider
Currently Offline
Posts: 6
Likes: 0
Joined: Jul 25, 2014 13:45:08 GMT -5
|
thank-you
by: lawauna52 - Jul 26, 2014 21:40:16 GMT -5
via mobile
Post by lawauna52 on Jul 26, 2014 21:40:16 GMT -5
Oldchopperguy in texas
|
|
New Rider
Currently Offline
Posts: 6
Likes: 0
Joined: Jul 25, 2014 13:45:08 GMT -5
|
Post by lawauna52 on Jul 26, 2014 21:37:00 GMT -5
With the kill-switch on, it should run. If not, then you'll need to check all the basics... fuel-lines, vacuum-lines, electric connections, etc. And, be SURE you're holding the rear-brake lever on, AND be sure the side-stand is not down. It should start OK sitting on the center-stand, but NOT with the side-stand down. In my earlier reply, I did say be sure BOTH stands are up. I was wanting to be SURE no ignition interlocks were engaged, but it should be started on the center-stand, just for safety. You don't want it to "run-away" with you if you start it with the wheels on the ground... THAT is why they require the rear-brake to be engaged when starting. If it's on the ground, that ensures it stays put... LOL! I got your message about the oil. With a quart of oil in the engine, it should show near full on your dipstick. Better check to be sure the drain-plug is in, and that oil didn't run out, as you put it in. There's only ONE place to fill the engine oil, that's the dipstick "hole"... so I can't imagine accidentally putting the new oil in the wrong place. But that new oil must be somewhere. You'll get it running OK... Sometimes it just takes some real patience and thorough inspection. Ride safe! Leo in Texas |
|
New Rider
Currently Offline
Posts: 6
Likes: 0
Joined: Jul 25, 2014 13:45:08 GMT -5
|
Post by lawauna52 on Jul 26, 2014 10:15:10 GMT -5
everytime I try to start the scooter I turn to kill switch off I did not know it was supposed to stay on now it's in the ON position what do i do someone please help
|
|
New Rider
Currently Offline
Posts: 6
Likes: 0
Joined: Jul 25, 2014 13:45:08 GMT -5
|
Post by lawauna52 on Jul 26, 2014 8:45:44 GMT -5
I changed gear oil as well as oil I'm in fortwayne,in and a guy who repairs mopeds is trying to charge me $100 I don't have to get it running I'm going to try everything I see on comments
|
|
New Rider
Currently Offline
Posts: 6
Likes: 0
Joined: Jul 25, 2014 13:45:08 GMT -5
|
Post by lawauna52 on Jul 25, 2014 14:27:11 GMT -5
Tao Tao ATM50-A1 was delivered Monday from proven power sports .Love the red scooter but it only ran first day.My daughter was ridding to work Tues and it just quit,bought it home changed spark plug,fuse,premium gas and it wont start,but its trying.I bought some starter fluid i don't know where to put it.lights coming on fine but it wont start .Don't know how to operate kick start either if any one can help its my daughters b-day present and she only rode it once.William is going to send new carburetor but I don't know that's the problem.HELP PLEASE  |
|
