New Rider
Currently Offline
Posts: 6 
Likes: 0
Joined: Jul 13, 2014 13:56:43 GMT -5
|
Post by abefroman on Mar 8, 2015 15:29:37 GMT -5
I have several scooter parts available from a custom build I decided to stop. I have the following available:
New 150cc long case engine (Mounted, never started) $300
Used 150cc short case engine (About 600mi) $150
New set of 13" wheels with Kenda tires mounted $130
New Front Caliper $30
Several other parts available as well as I'm parting the entire scooter out. The scooter is a Yamati Retro 150. All parts are located outside of Chicago
|
|
New Rider
Currently Offline
Posts: 6
Likes: 0
Joined: Jul 13, 2014 13:56:43 GMT -5
|
Post by abefroman on Jan 19, 2015 14:37:37 GMT -5
I'll try and get you some pics tonight. I know the spacers will be off as well. I'm guessing I'll need the entire 10" wide or 12" wide triple tree and front shock assembly from a scooter with 13" wheels. I just don't know if the body opening is wide enough to accommodate it
|
|
New Rider
Currently Offline
Posts: 6
Likes: 0
Joined: Jul 13, 2014 13:56:43 GMT -5
|
Post by abefroman on Jan 18, 2015 16:23:18 GMT -5
No, there isn't enough room left to right for the wheel to fit and the speedometer that works with the shock doesn't work with the wheel
|
|
New Rider
Currently Offline
Posts: 6
Likes: 0
Joined: Jul 13, 2014 13:56:43 GMT -5
|
Post by abefroman on Jan 18, 2015 16:08:24 GMT -5
I have a Yamati Retro Classic 150 that had 10" wheels. In trying to upgrade to 13" wheels and disc brakes I had to swap to a long case engine for the rear wheel to fit. However, the front wheel doesn't seem to fit. What size triple tree/shocks/axle etc would I need to get this to work? Any help is appreciated
|
|
New Rider
Currently Offline
Posts: 6
Likes: 0
Joined: Jul 13, 2014 13:56:43 GMT -5
|
Post by abefroman on Jul 14, 2014 18:55:48 GMT -5
He does have the gas tank under the trunk compartment as well as the cutouts in the fender. He also purchased a new exhaust along with the swingarm that has a longer header than the one for the old engine
|
|
New Rider
Currently Offline
Posts: 6
Likes: 0
Joined: Jul 13, 2014 13:56:43 GMT -5
|
Post by abefroman on Jul 13, 2014 14:10:24 GMT -5
A friend of mine has a Yamati Retro Classic 150 that had a bad engine. He decided to go with a 150cc long case engine instead of the short case it had so he could get larger wheels and tires. The long case engine has 2 sets of shock mounts, one at the back 16.5 inches from the engine mount and one in front of the axle, 13.75 inches from the mount. The only swingarm I could find only has the rear mount on it.
We can't use the rear shock mounts because the shocks won't clear the gas tank. Does anyone know of a long case swingarm with both mounts or should we cut the mount off the swingarm and weld it where we need it to be?
|
|
