New Rider
Currently Offline
Posts: 5 
Likes: 0
Joined: Mar 18, 2014 23:37:42 GMT -5
|
Post by rwheeler007 on Jun 29, 2014 9:24:31 GMT -5
So I've got a new ignition switch installed and hooked up. Deep breath, turn the key and........ nothing. Also it will still kickstart even with the column lock engaged. The switch seems to be functioning ie the lights, blinkers and column lock work again. I also noticed a small amount of smoke coming from near the headlights but I'm guessing it's because it wasn't moving and cooling the headlight. What is that connector for? The one pictured in the close up ignition damage, it's 9 pin but only 8 wires.
|
|
New Rider
Currently Offline
Posts: 5
Likes: 0
Joined: Mar 18, 2014 23:37:42 GMT -5
|
Post by rwheeler007 on Jun 26, 2014 12:38:44 GMT -5
On the close up of the damage to the ignition you can see a 9 pin connecter that only has 8 wires going to it. It doesn't appear to be speedo related... What is it for? Not sure if it's always been left disconnected of If I need to order more parts.
Ordered a new ignition and lock kit on eBay for $35 should be here in 5 days with the weekend. Not to bad.
$120 with shipping from Eagle Atv for the body parts. Ouch.
So far having my scooter stolen has cost at least 500 in random costs. The worst is probably the 250 the impound yard charged. I'm buying a big lock.
|
|
New Rider
Currently Offline
Posts: 5
Likes: 0
Joined: Mar 18, 2014 23:37:42 GMT -5
|
Post by rwheeler007 on Jun 26, 2014 8:44:37 GMT -5
I was able to get it started and and drive it home. No lights work besides the head light. Kickstart only. The craziest part to me is that they only had it for 36 hours! They did actually fix one thing lol. I'm having a hard time finding plastics online. I'm getting a kryptonite lock using a bike lock for the interm. |
|
New Rider
Currently Offline
Posts: 5
Likes: 0
Joined: Mar 18, 2014 23:37:42 GMT -5
|
Post by rwheeler007 on Jun 26, 2014 8:28:02 GMT -5
|
|
New Rider
Currently Offline
Posts: 5
Likes: 0
Joined: Mar 18, 2014 23:37:42 GMT -5
|
Post by rwheeler007 on Jun 24, 2014 9:50:02 GMT -5
So its pretty messed up;
2014 TaoTao Thunder with 1400 on the chinameter
Plastic around ignition broken
Ignition destroyed / removed
Spray painted (lights and all)
Air snorkel broken / removed at airbox
Baffels and rear of exhaust removed
Some damage to brake lever
Seat latch broken
Gas cap missing
How in the do I get this thing started? I'm guessing the starter button is out of the mix so kickstart only right? It should just start? Right? Wrong. So I'm thinking it is to much air to the airbox. I'm going to duct tape over the air box and punch some holes in it. Any other things to try of common recovered scooter tricks to get her back on the road?
Thanks guys. I've been lurking on the old site for a while, learned a bunch, but this is my first post worthy experience. Pics to follow.
|
|
