New Rider
Currently Offline
Posts: 5 
Likes: 0
Joined: Nov 27, 2013 19:40:27 GMT -5
|
Post by robertban on Oct 17, 2015 0:45:06 GMT -5
 Here are some picture of my 2013 Jonway or the (MC-13-250) chinese scooter that I had done off and on this summer (Yep it sure looked funny riding around wires hanging and tied up all over “what the it’s my scooter”) like I said this was done threw out the summer so I done the voltage readings that I could remember (could be wrong on some)also moving the CDI, Blocking Diode, and R/R all to the front of the scooter for better air flow and easy to get to also I added an electric fuel pump and rigging up the vacuum pump for easy hookup if I should need it I also replaced the radiator fan with an higher output one and an R/R (VRRPM3H) from Oregon Motorcycle Parts don’t remember for sure where I was reading about the blocking diode didn’t seem to work like it should I had my meter taped and wire to the frame while I was riding and thinking my reading was up toward 15 volts which I could not take a picture of this (maybe Alleyoop could help on this)
Also after cutting the wire that goes to the alarm and whatever else it went to if I disconnect this wire the scooter will start but only a few seconds sounds like it ran out of fuel until reconnected so now I’m thinking about putting in a hidden switch to this  s1375.photobucket.com/user/Robertban56/library/
|
|
New Rider
Currently Offline
Posts: 5
Likes: 0
Joined: Nov 27, 2013 19:40:27 GMT -5
|
Post by robertban on Aug 28, 2014 19:27:24 GMT -5
 Yamaha Moto 4 ATV
Wondering if anyone could help me find the owners & service manual or one that would work that I could download for a Yamaha moto 4 with 4 speed manual transmission ATV so I can try to get it to keep running for my nephew here are some numbers that he has found top of engine 55x-82590-03 / 55x074581 under the engine oil dip stick is 850cm3 this he said was the vin number JY455X008GC074581 the O could be zeros not for sure  Corrected Vin Number Above 1986 Yamaha YFM80S-R MOTO-4 Chappy Red JY455X00_GC050101
|
|
New Rider
Currently Offline
Posts: 5
Likes: 0
Joined: Nov 27, 2013 19:40:27 GMT -5
|
Post by robertban on Jun 27, 2014 12:24:37 GMT -5
Just wondering if I was to build a bumper lift for the front wheel of my 250cc (YY250T-2 or MC-13-250) touring scooter weight close to 400#. And if it was to break down how far could it be pull (if Possible) by the back wheel or would the engine be cranking due to the drive belt at a speed of 50mph or less
|
|
New Rider
Currently Offline
Posts: 5
Likes: 0
Joined: Nov 27, 2013 19:40:27 GMT -5
|
Post by robertban on Jun 17, 2014 17:04:38 GMT -5
 I have a new 2013 Roketa Johnway YY250T-2 (MC-13-250) which I'm unstable when it comes to riding it so I was thinking about buying a Cheap 50cc trike like say the (Mojo tri008) for instances from megamotormadness and was wondering if the trike axle would be changeable to work on my Roketa then replacing the Mojo with the Roketa parts
|
|
New Rider
Currently Offline
Posts: 5
Likes: 0
Joined: Nov 27, 2013 19:40:27 GMT -5
|
Post by robertban on May 8, 2014 23:04:36 GMT -5
Wondering if anyone has brought the ((Treasure Coast Scooters & Things trike conversion kit)) tcscooters.com/trikes.htm# and your thoughts about it I have a 2013 johnway YY250T-2 (MC-13-250) I'm wanting to convert my scooter to a 3 wheeler also if anyone else makes the kit for about the same price. I called there number today but got a no longer in service message
|
|
