New Rider
Currently Offline
Posts: 4
Likes: 1
Joined: Jul 28, 2013 5:15:43 GMT -5
|
Post by ratified911 on Jul 30, 2013 21:02:41 GMT -5
I made a wood mold and glassed it myself.
the aluminum plate on the front is held on by four 1/4" bolts ,
easy access with a nut driver.
Its amazing how many wires you end up with on these scooters.
|
|
New Rider
Currently Offline
Posts: 4
Likes: 1
Joined: Jul 28, 2013 5:15:43 GMT -5
|
Post by ratified911 on Jul 29, 2013 15:19:50 GMT -5
[replyingto=oldchopperguy]oldchopperguy[/replyingto]  Wow , thanks for the nice comments. I will see how many Build pics my wife took, It was a very fast 3 week build . I have learned to not take my phone into the Shop "you dont ruin phones w/metal dust and you get more done" As for the intake runner tube "AKA Tunnel Ram " , Its preforms perfectly. No dead spot, good vacuum "although i did go with an electric fuel pump, 2-psi \ no regulator" , and chills the fuel vapor too almost frost on a  degree day. I did open up the Idle jet a little , but i like a fat idle , it would have ran fine without it.   |
|
New Rider
Currently Offline
Posts: 4
Likes: 1
Joined: Jul 28, 2013 5:15:43 GMT -5
|
Post by ratified911 on Jul 28, 2013 5:29:11 GMT -5
|
|
degree day.
