New Rider
Currently Offline
Posts: 2
Likes: 0
Joined: Jun 20, 2013 12:47:37 GMT -5
|
LOST POWER
by: geo1975 - Jun 20, 2013 13:12:26 GMT -5
Post by geo1975 on Jun 20, 2013 13:12:26 GMT -5
Quick consult, here is the scenario: After thrashing a belt due to overlooking the mileage, changed belt worked fine for 3 weeks. Then one morning while going to work, after full throttle, I came to a stop and it died on me. Could not get it started again, I had spark and gas but would not start. After letting it stand for a while it started, but was missing a little bit of pull. After a week, I lost a lot more pull. Took to the shop and they "suggested" it might be the belt, so changed belt and still nothing. "Rollers" they said, so I changed rollers and they actually were worn and it did improve a bit for a while. Then started lagging on the take-off to the point I had actually to shove-off Back to the shop. They cleaned all the grime of everywhere involved with the CVT, checked carburetor and apparently everything was OK. Took it for a spin still the same "laziness". "Clutch" they said, changed clutch, no good results. I don´t know if it could be related, but recently the scooter died out on me. When I checked the gas filter had dried out. Shook it a little bit, it filled up and I was on my way again, still sluggishly. So, any ideas? My ride is a 4T 90cc. HELP!! Thanks
|
|
New Rider
Currently Offline
Posts: 2
Likes: 0
Joined: Jun 20, 2013 12:47:37 GMT -5
|
Post by geo1975 on Jun 20, 2013 12:57:57 GMT -5
Finallly!
|
|