|
|
Post by teddy554 on May 19, 2013 12:55:19 GMT -5
have you check to see if there is a spark
|
|
|
|
Post by teddy554 on May 18, 2013 8:49:04 GMT -5
|
|
|
|
Post by teddy554 on May 18, 2013 6:12:03 GMT -5
|
|
|
|
Post by teddy554 on May 18, 2013 6:09:11 GMT -5
What model scooter do you have, but nice work. Has for the oko carb not sure where in the throttle are you bogging
|
|
|
|
Post by teddy554 on May 17, 2013 23:42:55 GMT -5
The color doesnt matter hook the plug and then the wires match them the best you can if it doesnt start just swap them around
Sent from my SPH-D710BST using proboards
|
|
|
|
Post by teddy554 on May 16, 2013 21:24:56 GMT -5
|
|
|
|
Post by teddy554 on May 15, 2013 20:30:58 GMT -5
Got some goodies in today and have my ncy footrest coming in tomorrow, been to busy to work on it any. Hope to get my footrest on tomorrow and do some painting  |
|
|
|
Post by teddy554 on May 15, 2013 19:04:10 GMT -5
got to look n see
|
|
|
|
Post by teddy554 on May 15, 2013 5:51:48 GMT -5
A pipe will almost double your hp and power, it is well worth buying a pipe but you will need to retune the cvt, lighter roller mostly and up jet about 10 percent for the pipe
|
|
|
|
Post by teddy554 on May 14, 2013 19:58:56 GMT -5
no and yes, the outside is the same but the big difference is the oliver use a 90cc crank which has a 12mm wrist pin and a 16mm drive shaft and the miskito has the 10mm and smaller drive shaft here is a link to a build on a miskito so you can get some info from or pm they poster 49ccscoot.proboards.com/thread/825/skeedr-page-pittbull-racing |
|
|
|
Post by teddy554 on May 13, 2013 7:30:16 GMT -5
yeah its a fully modded motor , i just want the pipe for the sound and the clean look and the spacer is for the rear rim.
|
|
|
|
what to do
by: teddy554 - May 13, 2013 7:26:03 GMT -5
Post by teddy554 on May 13, 2013 7:26:03 GMT -5
This is what is broke Attachments:
|
|
|
|
what to do
by: teddy554 - May 12, 2013 20:05:44 GMT -5
Post by teddy554 on May 12, 2013 20:05:44 GMT -5
i want to know how did he break it
|
|
|
|
what to do
by: teddy554 - May 12, 2013 19:36:05 GMT -5
Post by teddy554 on May 12, 2013 19:36:05 GMT -5
Buy a new stator and replace the whole thing for 50-60 bucks. how you break it. you will need a flywheel puller
|
|
|
|
Post by teddy554 on May 12, 2013 8:28:29 GMT -5
|
|
range i would guess the one you have picture wont work you need one with a 35-38 mouth and a clamp to mount it here are some links to parts for your scooter 
degree elbow on it 
