New Rider
![*](//storage.proboards.com/forum/images/stars/star_black.png)
Currently Offline
Posts: 23
Likes: 2
Joined: Jan 22, 2017 12:08:49 GMT -5
|
Post by 2tall2scoot on Jan 22, 2017 12:16:18 GMT -5
Hi all. Long time lurker first time poster. I bought my first scoot last week. 2011 Sunny 150. I'm having a blast with it and wanted to mod a few things. I had two marker lights up front that I changed to LED. And I wanted to try to change the brake bulb also but I cannot figure how to get it out. Other than taking all the rear plastics off, I took all the screws and bolts I could see to pull the housing off or at least get the cover off to remove the bulbs.
Anyone have a tip? I read through 15 pages of the "tips and tricks" section.
Thanks!
|
|
New Rider
![*](//storage.proboards.com/forum/images/stars/star_black.png)
Currently Offline
Posts: 23
Likes: 2
Joined: Jan 22, 2017 12:08:49 GMT -5
|
Post by 2tall2scoot on Jan 23, 2017 21:56:51 GMT -5
No ideas? I don't think I should have to take all the plastics off just to get the brake light out.
|
|
|
Post by rockynv on Jan 24, 2017 4:55:29 GMT -5
A picture or link to the exact model would help. So many variations out there its hard to say which brake light you have.
|
|
|
Post by spandi on Jan 24, 2017 8:51:23 GMT -5
Hate to say this, but on my scoot the body panels have to come off first then the light fixtures are unscrewed from the INSIDE. (Oh well good time to do upgrades and that PDI)
|
|
New Rider
![*](//storage.proboards.com/forum/images/stars/star_black.png)
Currently Offline
Posts: 23
Likes: 2
Joined: Jan 22, 2017 12:08:49 GMT -5
|
Post by 2tall2scoot on Jan 24, 2017 9:36:07 GMT -5
Spandi I think you might be right about that. For the life of me I couldn't see how it could get it out with out removing the quarter panels. Ill take some pics and try to figure out what brake light I have so I can replace it with LED and take it apart all at once.
|
|