New Rider
Currently Offline
Posts: 2
Likes: 0
Joined: Apr 6, 2013 1:11:57 GMT -5
|
Post by chinesecraprider on Apr 6, 2013 1:25:07 GMT -5
I cant seem to figure out what it is going on. When its moist out side and I get out of work the thing wont start. Almost like there is not spark. Eventually it would start after 10 min of trying but tonight I ran the battery dead trying. Any ideas? I was thinking maybe the coil pack or spark plug.
|
|
|
|
Post by justbuggin2 on Apr 6, 2013 1:52:55 GMT -5
could be the above or it can be a loose connection in the wiring to the coil or on the cdi
|
|
|
|
Post by wilds on Apr 6, 2013 2:15:21 GMT -5
I would check the valve clearance.
|
|
New Rider
Currently Offline
Posts: 2
Likes: 0
Joined: Apr 6, 2013 1:11:57 GMT -5
|
Post by chinesecraprider on Apr 6, 2013 2:29:58 GMT -5
Well its 2012 150 with like 7k miles so would valve clearance even be an issue?
|
|
Sophomore Rider
Currently Offline
Posts: 247
Likes: 2
Joined: Feb 24, 2013 5:04:18 GMT -5
|
Post by gatekeeper on Apr 6, 2013 5:41:32 GMT -5
Yes, especially if they have never been adjusted before. Not uncommon for chinese scooter engines to need adjustment with less than 1000 miles on them. Should be set to .004 inches on the intake valve and .005 inches on the exhaust valve.
|
|
