Post by catman25 on Oct 15, 2016 15:33:09 GMT -5
I had a ruckus clone 150 only @500 miles. Took it all apart repainted it and built a pretty cool looking bike . now just to fix this issue . starts good. Pulls good. There is no issue driving short distances with low speed. But wot it cuts out after a few moments. I have yto pull over { hand of the throttle doesn't help } if I pull over it sometimes stays running and after a few moment u can take off again and it drives fine . other times it stalls and u can restart it fine . my first thought was not getting fuel and its leaning out when going fast . I did replace fuel lines as original was still on ! No fix ! Took apart canister and just vented gas tank thus removing one vacuum line (plugged) and removed the canister . still no fix ! Next replaced fuel filter and fuel pump . . thought it fixed it but no . saw air bubbles coming up the fuel line and thought air was trapped so took carb out and vcleaned it . I started bike to allow fuel to reach carb then turned the fuel dump screw a few times to get the air out . but it still dies it ? I can go pretty fast but 2to3 min of driving at 3/4 throttle to wot it cuts out . I stop at a stop sign and it dies but felt like it was going to die before actually stopping . any ideas?
