New Rider
Currently Offline
Posts: 1 
Likes: 0
Joined: May 31, 2016 2:12:46 GMT -5
|
Post by beefking69 on May 31, 2016 2:30:19 GMT -5
Can pickup a 08 xpeed 250i for next to nothing....guy said it needs a fuel pump and only one ive seen is 275$
Only reason i want this is for the engine so i can do an engine swap on my crossfire 150cc dune buggy.
Any ideal how much pressure the stock pump puts out and where i could find something like a in line pump that would work?
|
|
|
|
Post by rockynv on Jun 7, 2016 4:12:16 GMT -5
That is a fuel injected scooter so you need a regulated fuel pump that probably puts out 50 to 70 psi and draws what the fuel injection controller that it mates with expects.
All done and told its still probably a common Carter in-tank fuel pump found in many small 4 cylinder cars which they put in tank to cool them which keeps the cost down. If you spec out the pump separately from the complete in-tank pump assembly the cost will be lower however the pack usually has the fuel pressure regulator, fuel pickup with sock along with the fuel filter and is part of the re-circulation system that also prevents vapor lock. Those fuel injection pumps can die an early death if you do not put in the full system and recirculate the fuel to keep them cool.
|
|
