New Rider
Currently Offline
Linhai Aeolus 300, purchased 6/12/14; 12996 miles as 5/12/16
Posts: 2
Likes: 0
Joined: Jun 10, 2014 19:06:15 GMT -5
|
Post by troup1998 on May 12, 2016 7:25:31 GMT -5
Been riding my Linhai 300 ~2 years, 13,000 miles, every day to work; really enjoy it. About a week a ago I started it and it's a bit different.
When idling, it wants to go about 5-7mph; that is if I let go of the brake it will move. I called the dealer and they said it could be the idle or the clutch.
I did not mention this to them, when I turn off the bike, pushing it backwards is sometimes tough/not resistant free.
Would you say I have a clutch problem or the idling?
Thank you, Mike
|
|
|
Post by tortoise on May 12, 2016 11:56:37 GMT -5
A clutch pad may not be retracting properly . . or the pad material may have separated . . or the #28 nut may have loosened and is contacting the inner bell surface. A #20 bearing failure may also result in a drag force on the rear gearbox shaft . . example.
|
|
New Rider
Currently Offline
Linhai Aeolus 300, purchased 6/12/14; 12996 miles as 5/12/16
Posts: 2
Likes: 0
Joined: Jun 10, 2014 19:06:15 GMT -5
|
Post by troup1998 on May 12, 2016 12:09:02 GMT -5
Thank you for the timely reply. greatly appreciated.
|
|