Post by eman on Feb 21, 2016 18:55:05 GMT -5
50CC Gator scooter with a CVK carb. I bought a rebuild kit so I could disassemble and clean the carb. When I removed the cover and the diaphram I then removed the screw from the center and the retainer for the needle. Needle had the slotted washer in the center groove. Under the slotted washer was an o-ring. Is that all that is supposed to be there? Kit came with a silver washer approx same size as the O-ring, does it belong on the needle?
How do you size the jets, there are no numbers stamped on them. Main jet is .032 in measured with a drill bit. Is there a sizing for the idle jet?
How do you size the jets, there are no numbers stamped on them. Main jet is .032 in measured with a drill bit. Is there a sizing for the idle jet?