|
|
Post by alleyoop on Feb 24, 2013 16:15:51 GMT -5
If you have a straight axle on your trike this is what you most likely will find if you need to take it apart to put in new bearings or axles or Miter Gears in the Differential. Also do not forget to add grease in the Differential. Do not be surprised find grease underneath of your center cover or back of the motor. As you ride the differential gets hot and melt the grease and the grease sips out and gets thrown out. Alleyoop 150cc TRIKE AXLE FOUR MOUNTING BRACKETS:   50cc TRIKE AXLE: THE INTERNALS ARE THE SAME AS THE 150s AXLE THE ONLY DIFFERENCE IS THE 50ccs ONLY HAVE TWO MOUNTING BRACKETS:  |
|
New Rider
Currently Offline
Posts: 22
Likes: 0
Joined: Mar 26, 2013 13:31:38 GMT -5
|
Post by fido64 on Mar 26, 2013 14:06:41 GMT -5
what grade of grease is recomened// I am getting grease on the brake disk ant tricks you know about//Thank you Fido
|
|
|
|
Post by alleyoop on Mar 26, 2013 17:05:15 GMT -5
Yes your right Miter Gears not wormy gears,  The grease you want is grease that has a drop point of about 250 degrees+ so that with the heat it builds up it does not turn to liquid. Alleyoop |
|
|
|
Post by devo344a on Mar 26, 2013 23:11:52 GMT -5
Do they have trike kits that fit the 49cc scooters if anyone knows of some please let me know
|
|
|
|
Post by alleyoop on Mar 26, 2013 23:29:57 GMT -5
|
|
|
|
Post by triker on Mar 27, 2013 0:44:37 GMT -5
Wow, a thousand bucks.  For about seventeen hundred dollars ya could get the whole thing, already built to. Roy |
|
|
|
Post by alleyoop on Mar 27, 2013 1:04:07 GMT -5
HAHAHA, and most of them they do not include the RIMS and TIRES.
Alleyoop
|
|
New Rider
Currently Offline
Posts: 10
Likes: 0
Joined: Mar 25, 2013 10:12:40 GMT -5
|
Post by twistedburnout on Mar 29, 2013 20:41:14 GMT -5
Dude awesome thread! Thank you so much for posting those pics on the Ice Bear assembly, saves me a lot of guessing  |
|
|
|
Post by triker on Apr 22, 2013 0:24:28 GMT -5
what grade of grease is recomened// I am getting grease on the brake disk ant tricks you know about//Thank you Fido I had that problem when I got mine also. When the bearing chewed up the axle tube I took it apart and cleaned all the white petroleum jelly out. The grease was oozing out where the little miter gear shaft can be seen in the housing. I used silicone all around the shaft and housing before putting it back together. It hasn't lost a bit of grease yet. The little shaft has a pin through it that goes into the housing to keep it from spinning. I used lucas red-n-tacky #2 grease . Roy |
|
..BAD TO THE BONE..
