|
Post by onewheeldrive on Sept 17, 2015 13:41:40 GMT -5
I would go with 6g or 7g (or 6.5 rollers).
I feel with you at 185lb and with a 72cc(aka 80cc) that would be a good range. 8g is probably out of the question, imo, and 5g seems too light. 6g is probably as light as you want to go, and may be a bit on the light side.
I know you read on a forum that stock for Tao is 5.5g, but I wouldn't believe that because roller weights are inconsistent, and "stock" in my experiences means "too heavy" (and I weigh 150).
|
|
New Rider
Currently Offline
Posts: 11
Likes: 0
Joined: Sept 15, 2015 2:02:45 GMT -5
|
Post by spumil1 on Sept 18, 2015 11:54:00 GMT -5
Looks like that majority is pushing towards 7g sliders. Dr pulley the best way to go or anyone recommend something else?
|
|
New Rider
Currently Offline
Posts: 11
Likes: 0
Joined: Sept 15, 2015 2:02:45 GMT -5
|
Post by spumil1 on Oct 7, 2015 16:28:53 GMT -5
Well I put in the 7g Dr Pulley's today and it's not for the best. I still haven't weighed by stock but the loss in acceleration was drastic. stop speed is still near the same. Comparing weights by hand, the dr pulleys are a noticeable amount heavier than my stock. Does this make any sense?
|
|
|
Post by scooter on Oct 7, 2015 18:35:41 GMT -5
Well I put in the 7g Dr Pulley's today and it's not for the best. I still haven't weighed by stock but the loss in acceleration was drastic. stop speed is still near the same. Comparing weights by hand, the dr pulleys are a noticeable amount heavier than my stock. Does this make any sense? Yes, heavier weights cause slower acceleration.
|
|
New Rider
Currently Offline
Posts: 36
Likes: 6
Joined: Sept 15, 2015 5:55:30 GMT -5
|
Post by cato on Oct 7, 2015 18:51:04 GMT -5
use the cheaper rollers to find the optimum weight for your style of riding and setup, then purchase the better sliders
|
|