New Rider
Currently Offline
Posts: 5 
Likes: 0
Joined: Mar 19, 2015 1:21:40 GMT -5
|
Post by nrooney3 on Mar 24, 2015 20:45:21 GMT -5
Hey guys, On my Quantum 150 I saw that my speedo puck had a slight crack in it and that my front tire was making a sound, think i wittled it down to the bearing on the puck side. Who can direct me to a replacement part and the repair steps? Thanks again
|
|
New Rider
Currently Offline
Posts: 5
Likes: 0
Joined: Mar 19, 2015 1:21:40 GMT -5
|
Post by nrooney3 on Mar 24, 2015 20:49:04 GMT -5
Tao Tao has the replacement I think, not sure on how to remove and install the new ones
Front Wheel 13in speedo puck side
javascript:openSpellCheck();
|
|
|
|
Post by lain on Mar 24, 2015 21:37:47 GMT -5
Usually you just remove the nut from the front axle and slide it out. There should be a few pieces. The seperator, the wheel, the speedo puck. You may also have the plastic from the front wheel guard on there as well.
Unscrew the old speedo, clean off the cable end and set the old speedo puck aside. Put the new speedo puck on the wheel, you should see where it goes when you take the old one off. Now start sliding the axle back in, the speedo puck has a groove in it to make it stay in place, there should also be a bump on the shock where the speedo puck groove sits. Make sure to put everything back on in the reverse order you took it off. Then screw the speedo cable into the new speedo.
|
|
|
|
Post by geh3333 on Mar 26, 2015 0:32:06 GMT -5
Tao Tao has the replacement I think, not sure on how to remove and install the new ones Front Wheel 13in speedo puck side javascript:openSpellCheck(); If your not sure what bearings to order , the bearings should be marked on the side , around the metal rim of the bearing. |
|
