|
|
Post by JerryScript on Dec 24, 2014 22:33:50 GMT -5
|
|
|
|
Post by oldchopperguy on Dec 25, 2014 10:28:48 GMT -5
Happy EVERYTHING right back at ya!
And MERRY CHRISTMAS from the Old Chopper Guy...
Leo in Texas
|
|
|
|
Post by bandito2 on Dec 25, 2014 12:21:12 GMT -5
Had the family of the GF here (some from a couple other states) with their other
halves and a small hand full of their children last night plus a couple from the
ballroom dancing group that the GF dances with. So it was pretty much a house
full of boisterous Filipinos. (plus a few Americans 18 people total in this little
house) Tons of food, (I helped in the kitchen A LOT in the preceding days) lots
of picture taking, dancing and joy and laughter with karaoke singing. I'd sing
along some but I never had the mic in my hand. It was enough to just get me
out to dance in the living room with a bunch of other 2 left footers. All in all it
was one of the best Christmas get togethers that I can remember since childhood.
The only disappointment was that the light decorations outside kept kicking off
the circuit breaker because of water in the wires causing it to short out.
Hope everybody else had at least half as good a time. MERRY CHRISTMAS!!!
Now I need to finish prepping for my trip to Florida in a few days. Not real happy
about it getting colder, but at least it will not be so soggy. (hope the trailer lights
on the bike carrier will at least work for braking)
til next year.
|
|
|
|
Post by dmartin95 on Dec 25, 2014 19:26:45 GMT -5
Merry Christmas gang! I had a great Christmas.. The family has all been visited, wifes gone to work, finally have a minute to myself. To top it off, I had a scooter Christmas! My wife purchased me an ecotrons EFI kit  , Now, as of yet, I have no idea how to hook the thing up.... I had only shown my wife because I thought it was cool, not because I was seriously going to get it... But, being the sweetheart she is, she went ahead and got it for me.... So now I have to learn how to convert a scooter from a carb, into an electronic fuel injection.... I love a challenge... And this thing looks like it's going to be one....... I'm installing it on a Bintelli Havoc.      |
|
|
|
Post by alleyoop on Dec 25, 2014 19:46:49 GMT -5
|
|
|
|
Post by dmartin95 on Dec 25, 2014 20:50:32 GMT -5
Hey thanks! That's awesome! The .pdf you translated is VERY informative. I have read the ecotrons installation manual but it's hard to follow because it's not specific to the GY6 150cc scooter. The .pdf you created is much easier to follow. With the ecotrons manual, One minute you're reading about a GY6, next moment the manual is talking about snowmobiles and quads that don't even have a CDI.... I'm very excited about this kit, but at the same time I'm worried I'm going to screw up an awesome running scooter. I know Ecotrons proclaims instant starts with EFI, but my Bintelli's already start that way  But I will roll my sleeves up and dive into it.... When I do it, I'll make a video and add it to the tech section. The link on Prof is good too! I'm glad the author kept updating the thread... MY Bintelli's have a 12 pole stator that works with a DC CDI.... I'm not sure if a 12 pole is going to give me enough juice. I may have to upgrade to an 18 pole. They're rare for 125/150cc GY6, but do exist. Here's a link to a modified 18 pole stator for a GY6: LINK |
|
|
|
Post by JerryScript on Dec 27, 2014 13:42:25 GMT -5
Merry Christmas gang! I had a great Christmas.. The family has all been visited, wifes gone to work, finally have a minute to myself. To top it off, I had a scooter Christmas! My wife purchased me an ecotrons EFI kit , Now, as of yet, I have no idea how to hook the thing up.... I had only shown my wife because I thought it was cool, not because I was seriously going to get it... But, being the sweetheart she is, she went ahead and got it for me.... So now I have to learn how to convert a scooter from a carb, into an electronic fuel injection.... I love a challenge... And this thing looks like it's going to be one....... I'm installing it on a Bintelli Havoc. Now that is a very merry christmas indeed! I've read that the guys at ecotron are very helpful in getting those EFI kits working. Don't hesitate to call them with questions. Hope the conversion goes smooth for ya, lots of miles and smiles! |
|
|
|
Post by dmartin95 on Dec 27, 2014 15:49:07 GMT -5
Now that is a very merry christmas indeed! I've read that the guys at ecotron are very helpful in getting those EFI kits working. Don't hesitate to call them with questions. Hope the conversion goes smooth for ya, lots of miles and smiles! Yes, to say I'm excited would be an understatement. When I purchased my scooters it all started as a Nostalgic way to relive my youth I suppose... I grew up on a Honda spree.... Last spring I purchased a Bintelli Scorch to start out with, but it was only a 50cc and I felt like I was going to get ran over on these roads out here.... So I graduated to a 150cc.... Well riding these things are fun and all, but I have found that I equally enjoy wrenching on these little scooters. I have a full shop at my disposal and have inherited tools from my father (who worked at GM) and my wifes Grandfather that owned a machine shop.... I got everything except the lathe and shop press. So I'm super excited about this kit. I'm giving serious consideration to pairing it with a Taida 4 valve head |
|
..BAD TO THE BONE..