How to upgrade your scooter/moped to 11 pole stator w/video
by: dmartin95 - Dec 24, 2014 18:38:46 GMT -5
Post by dmartin95 on Dec 24, 2014 18:38:46 GMT -5
Hey gang, I purchased an 11 pole stator kit from Buggydepot.com from their holiday sale. There was lot's of questions about how to install it, whether or not it was AC or DC, will the wiring mate up, etc etc....
So I decided to make a video showing just how it's done. This is a 4 part video series with each vid around 10 minutes. Removal - Part 1, Installation - Part 2, Wiring Harness - Part 3 and lastly the starting and final checks.
I haven't had the opportunity to put an ammeter on their and test how much power I have available, but the lights, electrical and scooter spark draws roughly 100 watts and I'm at a steady 14.4v.
Anyhow, here's a link to the vids.....
So I decided to make a video showing just how it's done. This is a 4 part video series with each vid around 10 minutes. Removal - Part 1, Installation - Part 2, Wiring Harness - Part 3 and lastly the starting and final checks.
I haven't had the opportunity to put an ammeter on their and test how much power I have available, but the lights, electrical and scooter spark draws roughly 100 watts and I'm at a steady 14.4v.
Anyhow, here's a link to the vids.....
..BAD TO THE BONE..
