New Rider
Currently Offline
Posts: 42 
Likes: 2
Joined: Sept 3, 2014 18:26:07 GMT -5
|
Post by onceler on Sept 21, 2014 9:58:49 GMT -5
I was looking at NYC scooter parts, I read that they test their parts to make sure they work. Is there a better place?
|
|
|
|
Post by tvnacman on Sept 21, 2014 11:20:21 GMT -5
I don't think any other parts places are doing any testing . I'm the tester for nycscooterparts.com . I'm also the buyer packer shipper . What are your questions or concerns ?
The phone number is in the banner and is ment to be used .
John
|
|
New Rider
Currently Offline
Posts: 42
Likes: 2
Joined: Sept 3, 2014 18:26:07 GMT -5
|
Post by onceler on Sept 21, 2014 11:49:05 GMT -5
Sweet! I'm going to be buying a coil and Cdi from you probably on Monday. My name's Doug and I live in indiana. I just want to make sure that they're good before I put them on, and if they go bad after install I'll know I have some other problem. Thanks!
|
|
|
|
Post by tvnacman on Sept 21, 2014 12:03:21 GMT -5
no problem , do you have a meter ?
to check power and pulse off the stator .
John
|
|
New Rider
Currently Offline
Posts: 42
Likes: 2
Joined: Sept 3, 2014 18:26:07 GMT -5
|
Post by onceler on Sept 21, 2014 12:18:18 GMT -5
Yes I do. I checked it according to the video and it showed ok, but I'll probably double check here in a little bit. Can a bad stator ruin these ignitions?
|
|
|
|
Post by tvnacman on Sept 21, 2014 16:38:06 GMT -5
I have reversed the power and pulse wires and the cdi continued to work . That does not mean it is in your case .
John
|
|
New Rider
Currently Offline
Posts: 42
Likes: 2
Joined: Sept 3, 2014 18:26:07 GMT -5
|
Post by onceler on Sept 21, 2014 19:53:17 GMT -5
I think I'll take the flywheel/rotor off tomorrow and see what stator to buy and just replace everything at once, so it may not be until Tuesday until ordering parts
|
|
|
|
Post by tvnacman on Sept 22, 2014 6:22:09 GMT -5
I think I'll take the flywheel/rotor off tomorrow and see what stator to buy and just replace everything at once, so it may not be until Tuesday until ordering parts I don't agree with throwing parts at it , if that is the route you want to go I have everything . A few voltage measurements may save you some hard ache . John |
|
New Rider
Currently Offline
Posts: 42
Likes: 2
Joined: Sept 3, 2014 18:26:07 GMT -5
|
Post by onceler on Sept 22, 2014 10:26:01 GMT -5
I understand your concern and appreciate it, however riding season is almost up and I don't ant to wait on parts . I can always keep them as spare parts if their not needed
|
|
New Rider
Currently Offline
Posts: 42
Likes: 2
Joined: Sept 3, 2014 18:26:07 GMT -5
|
Post by onceler on Sept 23, 2014 9:00:09 GMT -5
|
|
|
|
Post by tvnacman on Sept 23, 2014 9:45:47 GMT -5
Single phase 8pole put in the comments 5 wire . The pic of the plug is not the stator plug .
John
|
|
New Rider
Currently Offline
Posts: 7
Likes: 0
Joined: Sept 25, 2014 23:06:43 GMT -5
|
Post by ohnotnotagain on Sept 25, 2014 23:11:00 GMT -5
When you installed the new coil, did you plug the wires in the same way as stock? On my orange coil, it wouldn't start until i plugged them in reverse (Black on green, green on black).
Fired right up then.
|
|
|
|
Post by tvnacman on Sept 26, 2014 7:08:53 GMT -5
When you installed the new coil, did you plug the wires in the same way as stock? On my orange coil, it wouldn't start until i plugged them in reverse (Black on green, green on black). Fired right up then. I have played around with this it did not make much difference . How are things going with this ? John |
|
New Rider
Currently Offline
Posts: 42
Likes: 2
Joined: Sept 3, 2014 18:26:07 GMT -5
|
Post by onceler on Sept 26, 2014 15:29:22 GMT -5
I have tried switching the wiring at the coil, but it had no effect.
It appears I have a package waiting for when I get home from you, John. Hopefully I can get everything put on this weekend and see what happens.
|
|
|
|
Post by tvnacman on Sept 26, 2014 16:18:26 GMT -5
Doug , feel free to post here , or your welcome to call .
John
|
|
