New Rider
Currently Offline
Posts: 1
Likes: 0
Joined: Aug 25, 2014 19:23:39 GMT -5
|
Post by justin on Aug 25, 2014 19:43:06 GMT -5
A tube attached to the oil tank has come loose and drained all the oil from my bike. The tube is located between the wheel and the backside of the tank. It's just a little shorter than the tank and a clear tube. The top is still attached but the bottom has become unattached and I don't know where it plugs into, as there is no obvious spot. Help! View of the tube through the wheel spokes. View of the tube from the bottom (loose end) hanging down by black cord running along bottom of scooter (brake line?) Type of scooter, viewed from the oil tank side.
|
|
New Rider
Currently Offline
Posts: 12
Likes: 0
Joined: Mar 23, 2015 18:59:35 GMT -5
|
Post by valfam on Mar 24, 2015 12:50:13 GMT -5
its under the motor. you need to remove the motor air cover you need to plug it into the oil injector. it maybe hard to see but its there
|
|
|
Post by jerseyboy on Mar 24, 2015 12:53:03 GMT -5
I would just find both ends and plug that thing up,,dont use the oil tank anymore,,just mix the oil and gas at 40:1 or so..much more reliable than that oil injector system IMO.That thing ever comes loose or the pump gets clogged,,goodbye motor,,and then your walking
|
|