|
Post by jjoshua20213 on Aug 28, 2014 0:12:49 GMT -5
If your tire is under 10-10,5 in than its short case, if its over its long.
I also pulled is off of scrappy's page.
SHORT/LONG CASE
How do I know if my 150cc GY6 is a long or short case? I want to change my belt and it has no indication on it?
With a few exceptions, the 125/150 GY6 has two belt sizes: 743 for the short case, and 842 for the long. If you have a 10 inch rim on the rear with a tire that is 3.50 wide or less, it's a short case. The belt cover will also measure 16 inches from end to end. If you have a 10" rim with a 4.00 wide, or a 12 or 13" rim, you have a long case. The belt cover will measure 17 1/8" long. Another easy way to tell is simply to count the number of retaining bolts for the belt cover, the short case has 8, the long one has 10.
|
|
|
Post by alleyoop on Aug 28, 2014 0:35:50 GMT -5
You have a long case motor, a short case motor has 8 bolts holding the cvt cover 4 inbetween the variator and clutch pulley you have 6 between the variataor and clutch pulley , three on top and three on the bottom all total on a long case 10 bolts holds the cvt cover. So you have the right belt a 835-20-30. But I think I spotted your belt problem Look at the Belt in the CLUTCH pulley it is already down about 1/2 inch or more. So that means the CONTRA spring is very weak and not putting pressure on the belt to push it up. Grab the Clutch pulley and squeeze it back toward you it probably is easy to squeeze open. Alleyoop This is a short case notice between the variator and clutch only 2 cvt bolt holes on top and 2 on the bottom. Also notice the belt how it sits in the pulleys.
|
|