|
|
Post by rcq92130 on Aug 12, 2014 15:12:11 GMT -5
Anyone recognize this device? Is it OK to simply plug the hose off and remove it as part of the vacuum line cleanup process?
Connects via a large diameter hose to a chrome pipe that bolts to the head ---- other side is a large (short) hose to a filter or check valve, the other side of which is open to the air.
(oops - can't figure out how to insert the photo of the thing ..... advice on how to do so would be welcome),.
|
|
|
|
Post by alleyoop on Aug 12, 2014 15:35:47 GMT -5
|
|
|
|
Post by rcq92130 on Aug 12, 2014 16:14:55 GMT -5
Yep, that's it.
What's it do?
(and how do you attach a photo if need be)?
|
|
|
|
Post by alleyoop on Aug 12, 2014 16:31:12 GMT -5
HERE IS HOW TO POST PICTURES USING THIS HOST. IT IS EASY AND FREE: 1. Click on this link: tinypic.com/index.php2. Click on Browse, that will link to your computer. 3. Find what you want to load. 3. Click on the name of the picture 4. Click on OPEN 5. Click on UPLOAD 6. Click on the LINK that starts with IMG. 7. RIGHT CLICK and CLICK on COPY 8. THEN Come here to your THREAD ON DOC. 9. RIGHT CLICK and CLICK ON PASTE. Alleyoop itistheride.boards.net/thread/4902/emissions-scoot |
|
|
|
Post by rcq92130 on Aug 12, 2014 17:15:49 GMT -5
|
|
|
|
Post by alleyoop on Aug 12, 2014 17:26:43 GMT -5
From that valve that you circled does a hose or chrome pipe connect to the side of the VALVE COVER?
Alleyoop
|
|
|
|
Post by rcq92130 on Aug 12, 2014 18:58:10 GMT -5
Yes.
First a large diameter hose (3/8" ?), which connects to a chrome pipe, which bolts (2 bolts) onto the head next to the valve cover.
|
|
|
|
Post by rcq92130 on Aug 12, 2014 19:02:12 GMT -5
One more thing.
You can see in the photo my kludge intake manifold. But it does not have any nipples for hoses "pre-carb", and the stock air filter includes what I think is a crankcase vent (large hose) that goes into a chamber in the front of the air filter, then to the pre-carb manifold.
Do I need to get my muffler guy to weld a nipple onto my kludge .... or should I do something else with the "crank vent" (?) hose?
I DID buy a scooterdgs PVC valve, but do not know what to do with it.
|
|
|
|
Post by alleyoop on Aug 12, 2014 20:13:52 GMT -5
No leave your air intake alone, all you need to do is take that hose coming off the top of the VALVE COVER(crankcase vent hose) and put a fuel filter on the end of it and zip tie it higher than the valve cover, it just has to VENT.
So if you want to take the PAIR system off get a plate to cover the hole or make your own and take all that stuff off, make sure you block the VACUUM at it's ORIGIN.
Alleyoop
|
|
|
|
Post by rcq92130 on Aug 12, 2014 20:31:39 GMT -5
Thanks, Oop.
After your earlier msg i ordered the pre-fab blank-off plate. Thought of making one up, but not worth the effort. Will strip the PAIR stuff out once the plate arrives.
What do I do with the Scoot-Dgs PVC valve I bought? Paperweight?
|
|
|
|
Post by alleyoop on Aug 12, 2014 20:57:08 GMT -5
Thanks, Oop. After your earlier msg i ordered the pre-fab blank-off plate. Thought of making one up, but not worth the effort. Will strip the PAIR stuff out once the plate arrives. What do I do with the Scoot-Dgs PVC valve I bought? Paperweight? HAHAHAHA, yes put it next to your computer, those things are garbage anyway just something else to empty your wallet. Alleyoop |
|
..BAD TO THE BONE..
