Freshman Rider
Currently Offline
Posts: 85
Likes: 1
Joined: Mar 28, 2013 0:44:33 GMT -5
|
Post by chamisataza on May 20, 2014 14:50:10 GMT -5
good day..
my 2 stroke dd50 is running good fast....when every time i twisted the throttle up and down on a running motion..45-50mph.i just noticed that i seems that the carb is drown/bogging then it will die and stop i will move to curbside and try to start it choke it will start and run good and fast..i have a 21 oko ct mani.i don't know whats the problem?or something to adjust pls help... thank you...
|
|
|
|
Post by alleyoop on May 20, 2014 15:19:36 GMT -5
Can you take a picture of your carb so i can see what type of carb is on there so I can tell you what to try.
DO this to find out if it needs MORE FUEL OR LESS FUEL:
When it STARTS to BOG BACK OFF THE THROTTLE about 1/4 of an INCH and HOLD THE THROTTLE there and see what the motor does.
Does it SPEED UP or Does it NOT BOG anymore and settles down and keeps running.
Alleyoop
|
|
Freshman Rider
Currently Offline
Posts: 85
Likes: 1
Joined: Mar 28, 2013 0:44:33 GMT -5
|
Post by chamisataza on May 20, 2014 16:32:02 GMT -5
if its on WOT no problem it runs good even in 1/2 throttle holding there it runs good even in idling is good when i just play the throttle up and down it seems drowning or gulping some air i am using uni filter.yes it speed up really good and not bog anymore and runs fast..
|
|
Freshman Rider
Currently Offline
Posts: 85
Likes: 1
Joined: Mar 28, 2013 0:44:33 GMT -5
|
Post by chamisataza on May 20, 2014 16:46:46 GMT -5
i
|
|
|
|
Post by alleyoop on May 20, 2014 16:53:51 GMT -5
So if you open the throttle really quick it bogs is that right?
Alleyoop
|
|
Freshman Rider
Currently Offline
Posts: 85
Likes: 1
Joined: Mar 28, 2013 0:44:33 GMT -5
|
Post by chamisataza on May 20, 2014 17:03:47 GMT -5
sorry for the picture i try to put i don't how to do it....no it does not bog it has a quick response and runs really good but when i starting to play the throttle up and down start to bog and dies and i will kick start again w/ choke and runs good and idle good too
|
|
Freshman Rider
Currently Offline
Posts: 85
Likes: 1
Joined: Mar 28, 2013 0:44:33 GMT -5
|
Post by chamisataza on May 20, 2014 17:12:50 GMT -5
|
|
|
|
Post by alleyoop on May 20, 2014 18:27:44 GMT -5
Use this to put pictures or VIDEO on here, it is easy and free: Sounds like the Carb is not set right and the RPMS or taking to long to DROP and or RISE and that would cause your problem, that is a LEAN condition. Alleyoop 1. Click on this link: tinypic.com/index.php2. Click on Browse, that will link to your computer. 3. Find what you want to load. 3. Click on the name of the picture 4. Click on OPEN 5. Click on UPLOAD 6. Click on the LINK that starts with IMG. 7. RIGHT CLICK and CLICK on COPY 8. THEN Come here to your THREAD ON DOC. 9. RIGHT CLICK and CLICK ON PASTE. |
|
Freshman Rider
Currently Offline
Posts: 85
Likes: 1
Joined: Mar 28, 2013 0:44:33 GMT -5
|
Post by chamisataza on May 21, 2014 7:04:46 GMT -5
|
|
Freshman Rider
Currently Offline
Posts: 85
Likes: 1
Joined: Mar 28, 2013 0:44:33 GMT -5
|
Post by chamisataza on May 21, 2014 7:06:23 GMT -5
thanks alleyoop for the DLoad instruct,.
|
|
Freshman Rider
Currently Offline
Posts: 85
Likes: 1
Joined: Mar 28, 2013 0:44:33 GMT -5
|
Post by chamisataza on May 21, 2014 13:29:27 GMT -5
i just noticed to that when i am driving fast and then i will slow and stop using rear brake the engine stop/dies too.so i have to center stand the scooter and i noticed my rear wheels won't turn..but when i kick start it will start up and my rear wheels continue running just i little w/o holding the throttle..give a twist on my throttle..revs good..but when i brake the rear brakes the engine stops/dies....so i have to drive my scoot couple of blocks and the symptoms is gone..thats what i do every time it will occur./happen..any suggest/comments,rxn..
|
|
|
|
Post by alleyoop on May 21, 2014 13:45:14 GMT -5
TO much air is getting in and not enough fuel, turn the AIR RATIO MIXTURE screw CLOCKWISE about 1/8 at a time and see if it helps it. The other thing you can do is I noticed you drilled two big holes on the AIR TUBE you can try covering half of one up to cut some air off . Alleyoop  |
|
Freshman Rider
Currently Offline
Posts: 85
Likes: 1
Joined: Mar 28, 2013 0:44:33 GMT -5
|
Post by chamisataza on May 21, 2014 14:45:11 GMT -5
maybe your right alleyoop thats what i am thinking too much air actually there is 3 small holes at the bottom of that 2 holes for the oil to drip i wet the foam filter w/oil..i guess i have to eat more P.Pan peanut butter..
|
|
|
|
Post by alleyoop on May 21, 2014 15:08:48 GMT -5
maybe your right alleyoop thats what i am thinking too much air actually there is 3 small holes at the bottom of that 2 holes for the oil to drip i wet the foam filter w/oil..i guess i have to eat more P.Pan peanut butter.. NOT MAYBE that is the problem. So like I said you can take some tape and wrap it around HALF of one of the big holes and see if that is enough if not cover a little more of the hole pretty easy way to test. Alleyoop |
|
Freshman Rider
Currently Offline
Posts: 85
Likes: 1
Joined: Mar 28, 2013 0:44:33 GMT -5
|
Post by chamisataza on May 22, 2014 15:47:55 GMT -5
Thanks admin.Alleyoop Problem solve. ....  |
|
..BAD TO THE BONE..
