New Rider
Currently Offline
Posts: 39
Likes: 1
Joined: Mar 7, 2013 19:14:11 GMT -5
|
Post by jvanderwarf on Apr 25, 2014 23:22:21 GMT -5
I would just be glad they caught it.... Who knows could have been dropped during shipping. I learned the hard way dont rush a performance build this time is the key to reliability. Good luck and let us know how you like the upgrade.
|
|
|
|
Post by doublert on Apr 26, 2014 7:37:48 GMT -5
Ncy head bent valve? Thats odd its a decent quality head. Yep, thats what he said. He texted me said valve was bent from exhaust side. |
|
|
|
Post by millsc on Apr 27, 2014 9:08:36 GMT -5
He replacing the valve or you getting a new head?
|
|
|
|
Post by doublert on Apr 27, 2014 12:45:28 GMT -5
He replacing the valve or you getting a new head? I guess he is going to replace the valve.... |
|
|
|
Post by doublert on Apr 29, 2014 18:30:34 GMT -5
My motor was completed today. Puting it back in, and connecting everything now. We're putting in Rotella 15-40 oil in it. Would this oil be fine?
|
|
|
|
Post by doublert on Apr 29, 2014 19:13:32 GMT -5
Got everything hooked back up, and it fired right up after the second try. Funny thing is that has me worried is that it made a loud slapping sound, so we shut it off immediately! What would that be? Valves were set at .004 My friend that did the install, is on the way over now. I'll keep everyone updated. What was that sound though?
|
|
|
|
Post by millsc on Apr 29, 2014 19:35:34 GMT -5
Piston hitting the head? I ran a matching combustion chambered head the ncy is 58.5.
|
|
|
|
Post by doublert on Apr 29, 2014 19:42:00 GMT -5
Piston hitting the head? I ran a matching combustion chambered head the ncy is 58.5. my guy is checking it now, everything was TDC, didnt use gaskets with the spacer. Him and my brother are going over it now as we speak..... |
|
|
|
Post by doublert on Apr 29, 2014 19:53:49 GMT -5
Millsc, you were right! The piston was hitting the head! Can we double up on the head gaskets? We did not use the gaskets on the spacer. Quick replys back would be great! This is my only Transportation.
|
|
|
|
Post by doublert on Apr 29, 2014 20:13:44 GMT -5
Piston hitting the head? I ran a matching combustion chambered head the ncy is 58.5. Should we put the gaskets on the spacer? |
|
|
|
Post by millsc on Apr 29, 2014 20:43:06 GMT -5
Chain will be too tight you need a bigger combustion chambered head
|
|
|
|
Post by millsc on Apr 29, 2014 20:45:59 GMT -5
If you must use a gasket use the one that came with ncy gasket set its thinner and only use one rtv the other side.
|
|
