New Rider
Currently Offline
Posts: 44
Likes: 0
Joined: Oct 22, 2013 20:48:07 GMT -5
|
Post by stevo on Jan 12, 2014 20:42:48 GMT -5
Does anyone know how to check valve clearance correctly ?And what is the measurnent?
|
|
|
|
Post by alleyoop on Jan 12, 2014 20:58:08 GMT -5
Yes, what motor do you have a 50cc, 150cc, 250+ cc.
Ususally for a 50 .003 inchs on both valves works good, on the 150s .004 inchs on both works good, on the bigger motors .004 on the intake and .006 on the exhaust works good.
Alleyoop
|
|
New Rider
Currently Offline
Posts: 46
Likes: 0
Joined: May 1, 2013 17:57:04 GMT -5
|
Post by robert777 on Jan 15, 2014 19:23:27 GMT -5
I just did a valve adjustment on my Agility 125, the specs were .12mm
|
|
|
|
Post by alleyoop on Jan 15, 2014 19:43:39 GMT -5
There you go .12mm is .0047 inchs
Alleyoop
|
|
New Rider
Currently Offline
Posts: 17 
Likes: 0
Joined: Dec 28, 2013 16:20:03 GMT -5
|
Post by scootahblitz on Jan 20, 2014 13:41:29 GMT -5
There you go .12mm is .0047 inchs Alleyoop |
|
New Rider
Currently Offline
Posts: 17
Likes: 0
Joined: Dec 28, 2013 16:20:03 GMT -5
|
Post by scootahblitz on Jan 20, 2014 13:44:30 GMT -5
what I think is meant is with modeleling clay or plastigauge or solder? How is that done correctly? |
|
|
|
Post by alleyoop on Jan 20, 2014 13:50:33 GMT -5
Yes and smoke and mirrors help
|
|
Sophomore Rider
Currently Offline
Posts: 137
Likes: 24
Joined: Jul 6, 2013 21:27:28 GMT -5
|
Post by mopojo on Jan 22, 2014 23:54:01 GMT -5
Dont forget El Chupacabra!   |
|
..BAD TO THE BONE..
