Freshman Rider
Currently Offline
Posts: 71
Likes: 4
Joined: Mar 30, 2013 15:09:16 GMT -5
|
Post by played1 on Dec 29, 2013 10:19:24 GMT -5
Alright, I got the 2 adjustment screws . I'm assuming the one on the bottom of the bowl is for air/fuel but what the is the one mid way up?
|
|
Sophomore Rider
Currently Offline
Posts: 139
Likes: 20
Joined: Mar 2, 2013 6:30:15 GMT -5
|
Post by dyoung1167 on Dec 29, 2013 10:33:06 GMT -5
pic please, two screws aren't usually up/down. more like front/back and under the bowl would more likely be a fuel dump to empty the bowl.
|
|
|
|
Post by alleyoop on Dec 29, 2013 14:20:10 GMT -5
Here is your common CVK carb: Alleyoop THIS IS THE LEFT SIDE:  THIS IS THE RIGHT SIDE:  |
|
Freshman Rider
Currently Offline
Posts: 71
Likes: 4
Joined: Mar 30, 2013 15:09:16 GMT -5
|
Post by played1 on Dec 29, 2013 14:48:04 GMT -5
what's throwing me is that that lower screw seems like it would be the air/fuel screw. When I look at my oem carb, it has the same pointed screw in the same location that is the air/fuel screw (at the bottom of the bowl)
|
|
Freshman Rider
Currently Offline
Posts: 71
Likes: 4
Joined: Mar 30, 2013 15:09:16 GMT -5
|
Post by played1 on Dec 29, 2013 14:50:43 GMT -5
what else Y's into the decelerator hose?
|
|
|
|
Post by alleyoop on Dec 29, 2013 14:55:44 GMT -5
The screw at the bottom is your DRAIN SCREW you loosen it up and the gas in the bowl comes out of the hose next to it. You will not normally drain your bowl. The other side of the "Y" or "T" usually goes to your PETCOCK or FUEL PUMP. Alleyoop Here is my setup I use a brass "T"  |
|
..BAD TO THE BONE..