|
|
Post by millsc on Dec 19, 2013 15:40:07 GMT -5
Got me a ncy 61mm kit new cam and head on the way, tore my scooter apart today since its warm. I was curious so i measured my crankcase opening and its 64mm i guess i could of went bigger without boring the case, but never thought about it just thought the case was the norm 62.5mm.
|
|
|
|
Post by tvnacman on Dec 19, 2013 18:00:22 GMT -5
so did you rebuild it yet ? if I found out the jug fit I would have kept going .
John
|
|
|
|
Post by millsc on Dec 19, 2013 18:09:28 GMT -5
Waiting for stuff to come in its stripped to the crank the jug will fit no issues
|
|
|
|
Post by nulldevice on Dec 21, 2013 12:42:39 GMT -5
In the early days of air cooled engines there was a learning curve about cooling them. They tried thin cylinder walls then found out the motor cooled better with thicker cylinder walls. I wonder if the cylinder you get start with a different casting than stock so that the cylinder walls are still thick.
|
|
Sophomore Rider
Currently Offline
Posts: 217
Likes: 22
Joined: Mar 3, 2013 8:42:52 GMT -5
|
Post by buford1488 on Dec 21, 2013 15:20:59 GMT -5
sorry still trying to figure out this photo bucket stuff....lol
|
|
|
|
Post by JerryScript on Dec 21, 2013 22:57:43 GMT -5
sorry still trying to figure out this photo bucket stuff....lol On your photobucket gallery, copy any of the links in the boxes below your picture. Then here when posting, click the image button, paste in what you copied from photobucket, then erase everything but the URL itself, remove everything else, then post it. |
|
