Fabricate a spanner wrench for the variator and clutch

Junior Rider

Currently Offline

Posts: 381
Likes: 9
Joined: Aug 4, 2013 5:46:47 GMT -5

Fabricate a spanner wrench for the variator and clutch by: earlylight160 - Nov 3, 2013 15:10:55 GMT -5

Reply Quote

Post by earlylight160 on Nov 3, 2013 15:10:55 GMT -5

Here's a sketch of a spanner wrench I put together in about 1 hour. Got the bar stock threaded rod nylock nuts and machine screws at Ace Hardware for about $7.00 Had the Plasti Dip

in my workshop.

With the wind in my face

2012 Tomos Twister 50, Performance CDI, NGK Iridium plug
Gates Power Link Kevlar CVT belt, Digital Tach/Hour Meter
Installed three stage battery charger. Added Trunk (Top Box) Stainless steel Cup Holder, LCD Clock/Calender, and LED lighting inside the trunk, the glove box and the storage compartment beneath the seat.

spandi PM spandi spandi's Posts spandi's Threads Senior Rider Currently Offline L.D.O. Posts: 2,837 Likes: 219 Joined: Feb 24, 2013 14:43:55 GMT -5	Fabricate a spanner wrench for the variator and clutch by: spandi - Nov 3, 2013 18:23:37 GMT -5 Reply Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by spandi on Nov 3, 2013 18:23:37 GMT -5 I sure this will help folks to hold these pieces in place (as long as you're using an impact wrench) otherwise those overtightened Chinese nuts will twist it into a pretzel.

earlylight160 PM earlylight160 earlylight160's Posts earlylight160's Threads Junior Rider Currently Offline Posts: 381 Likes: 9 Joined: Aug 4, 2013 5:46:47 GMT -5	Fabricate a spanner wrench for the variator and clutch by: earlylight160 - Nov 3, 2013 19:28:37 GMT -5 Reply Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by earlylight160 on Nov 3, 2013 19:28:37 GMT -5 It worked well on my Taiwanese Tomos Twister (built by SYM)
	With the wind in my face 2012 Tomos Twister 50, Performance CDI, NGK Iridium plug Gates Power Link Kevlar CVT belt, Digital Tach/Hour Meter Installed three stage battery charger. Added Trunk (Top Box) Stainless steel Cup Holder, LCD Clock/Calender, and LED lighting inside the trunk, the glove box and the storage compartment beneath the seat.

pmatulew PM pmatulew pmatulew's Posts pmatulew's Threads Junior Rider Currently Offline Posts: 370 Likes: 17 Joined: Jun 6, 2013 17:37:14 GMT -5	Fabricate a spanner wrench for the variator and clutch by: pmatulew - Nov 4, 2013 6:32:58 GMT -5 Reply Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by pmatulew on Nov 4, 2013 6:32:58 GMT -5 I made one even wimpy-er than that and it worked just fine for me.
	2008 Lance Milan (ZN150T-F) 1991 Honda ST1100

Fabricate a spanner wrench for the variator and clutch By earlylight160 (Read 1,032 times)

Post by earlylight160 on Nov 3, 2013 15:10:55 GMT -5

Post by spandi on Nov 3, 2013 18:23:37 GMT -5

Post by earlylight160 on Nov 3, 2013 19:28:37 GMT -5

Post by pmatulew on Nov 4, 2013 6:32:58 GMT -5

Shoutbox