|
Post by scoots on Oct 27, 2013 15:51:43 GMT -5
After installing my airsal bbk i noticed the rear of the scooter was leaking oil near the suspension spring
Started hearing knocking sounds on and off
Then on way home my scooter made loud noise then shut off
When i try to start it i hear a grinding sound
I heard my top end fire and try to idle but it woukd stop thinkinf something is blocking the final gears
Today i took off my final gear cover and replaced everything with a spare motor
I noticed my oil seals were bad on one of.my gears and the output shaft looked worn before i replaced i. all
Had to use Rtv gasket maker so it has to cutr then ill see if it works if not im stuck
|
|
|
Post by scoots on Oct 27, 2013 20:29:03 GMT -5
am i missing anyhting else?
|
|
|
Post by rockynv on Oct 29, 2013 4:08:15 GMT -5
You may have not gotten the valve gap set right and blown your motor oil out the purge which vented over the cvt and drained off the back of the bike. The sprague clutch on the starter can also make grinding noises too. What does the engine oil look like and is it low?
|
|