Post by crawdad on Aug 3, 2013 20:22:48 GMT -5
[replyingto=alleyoop]alleyoop[/replyingto]Thanks Ally -I will follow you up on reinventing the pull cord for the seat.I had thought along those lines earlier.If you have any suggestions as exactly the best way to do it ,it would help me.
There are no grease nipples anywhere on the differential.
The emergency brake thing kind of has me confused. What happens when you pull or push on the little lever? Is this something that would be used often?
Where would the brake fluid be added? And exactly how much as I had read some posts where the guys are talking about using needles and such to measure .I've used needles on sheep but not on scooters.I think mine says Dot 3 ,but I will check again.
Thanks Ally, I will be back to you most likely with more questions after I have absorbed some of this info you have just given me.
Also I will take a couple of pictures of ,would it be the last main shaft that the wheels are attached to ?
Also what area would the Tranny drain and fill be in .I am asking this question as there is some difference between this trike and the two wheel trike .I had no problem finding the add and drain on the the two wheel trike but there is quite a bit of added material (chain and such)
which doesn't seem familiar to me .There is a long plate with about 8 screws holding it to the motor and the kick starter sticks out of that plate
Would I have to take this plate off to locate the drain and add opening.
Right now I have removed the holder mechanism for the seat as I don't want to have it locked up on me and I cant get it open . I could use the existing release cable that is already there ,if I can find the front end and if it is long enough to be able to hold onto.
Thanks again !
There are no grease nipples anywhere on the differential.
The emergency brake thing kind of has me confused. What happens when you pull or push on the little lever? Is this something that would be used often?
Where would the brake fluid be added? And exactly how much as I had read some posts where the guys are talking about using needles and such to measure .I've used needles on sheep but not on scooters.I think mine says Dot 3 ,but I will check again.
Thanks Ally, I will be back to you most likely with more questions after I have absorbed some of this info you have just given me.
Also I will take a couple of pictures of ,would it be the last main shaft that the wheels are attached to ?
Also what area would the Tranny drain and fill be in .I am asking this question as there is some difference between this trike and the two wheel trike .I had no problem finding the add and drain on the the two wheel trike but there is quite a bit of added material (chain and such)
which doesn't seem familiar to me .There is a long plate with about 8 screws holding it to the motor and the kick starter sticks out of that plate
Would I have to take this plate off to locate the drain and add opening.
Right now I have removed the holder mechanism for the seat as I don't want to have it locked up on me and I cant get it open . I could use the existing release cable that is already there ,if I can find the front end and if it is long enough to be able to hold onto.
Thanks again !
..BAD TO THE BONE..
