|
Post by urbanmadness on Oct 6, 2013 3:14:45 GMT -5
Guys,
I just had a rear blow out and it bent the wheel slightly on my 150. It is ride-able but, I'm not a happy camper. In my garage, I have a 50cc with a good rear wheel and tire.
They are both 10" wheels with integral brake drums. Can I swap them?
|
|
Sophomore Rider
Currently Offline
Posts: 247
Likes: 2
Joined: Feb 24, 2013 5:04:18 GMT -5
|
Post by gatekeeper on Oct 6, 2013 4:39:29 GMT -5
It depends on whether the splines and length of the output shaft match with the dimensions on the wheel.
|
|
|
Post by SylvreKat on Oct 6, 2013 6:56:09 GMT -5
I am not mechanical, but logically if you measure both and they're basically the same, then yes. But I would measure everything between them--esp anything that contacts with the scoot. If it's off at all, I wouldn't swap them and take a risk.
>'Kat
|
|
|
Post by pmatulew on Oct 6, 2013 6:57:01 GMT -5
If they're both in the garage, try it! See if it fits.
|
|