|
|
Post by geh3333 on May 16, 2015 6:23:15 GMT -5
Oh man , they don't open until 8am , darn ! I guess I can warm the scoot up and take a little ride first !
|
|
|
|
Post by ramblinman on May 16, 2015 6:31:05 GMT -5
yep, played this game years ago. Same here . I have to run to the store for some milk . my cocoa pebbles are calling my name !! i'm thinking about going out to eat. my parts arrived yesterday and got everything installed before dark. replacing the worn out camshaft has made this scoot sound much better. it even turns over much faster now. only problem is a oil leak |
|
|
|
A Little Bird
by: geh3333 - May 16, 2015 7:12:08 GMT -5
via mobile
Post by geh3333 on May 16, 2015 7:12:08 GMT -5
Same here . I have to run to the store for some milk . my cocoa pebbles are calling my name !! i'm thinking about going out to eat. my parts arrived yesterday and got everything installed before dark. replacing the worn out camshaft has made this scoot sound much better. it even turns over much faster now. only problem is a oil leak Ewh, where is the oil leak ? |
|
|
|
Post by ramblinman on May 16, 2015 8:00:12 GMT -5
i'm thinking about going out to eat. my parts arrived yesterday and got everything installed before dark. replacing the worn out camshaft has made this scoot sound much better. it even turns over much faster now. only problem is a oil leak Ewh, where is the oil leak ? i think the valve cover. its not a bad leak, just a few drips., either i started the engine too soon or this old tube of ultra black is no good... just got back from a 7 mile trip, scoot is running great. soon as it cools down i'm gonna clean the engine up and redue the cover. |
|
|
|
Post by geh3333 on May 16, 2015 8:15:18 GMT -5
I recently just made a gasket out of a sheet of gasket paper " the cork kind " . I traced the valve cover over the gasket material and cut it out. I also put a thin coat of gasket maker on both sides of the gasket . it seems to be holding up pretty good .
|
|
|
|
Post by ramblinman on May 16, 2015 8:18:33 GMT -5
I recently just made a gasket out of a sheet of gasket paper " the cork kind " . I traced the valve cover over the gasket material and cut it out. I also put a thin coat of gasket maker on both sides of the gasket . it seems to be holding up pretty good . interesting, if it leaks again i may have to try that. |
|
